Shop DIGITAL SECURITY CONTROLS | Brands We Sell

The L-1 is a cabinet lock with 2 keys from DSC.

Fully supervised for AC failure, low battery and AUX failure
Provides up to 1 Amp @ 12 VDC
Compatible with HS2016, HS2032, HS2064, HS2128 control panels

Alarm panel cabinet. HS2032 control board. 16.5V 40VA power transformer. 12V 4A Backup battery.

Fully supervised for AC failure, low battery and AUX failure
4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDC
Output #1 can be used as a supervised bell output
Provides up to 1 Amp @ 12 VDC

Compact sensor is inserted into the side of the door, barely discernible once installed
Ideal for residential and light commercial installations
Clear flanges attached to the sensor blend in with the doorframe and enable near-invisible installation regardless of the doorframe’s color.

4 programmable function keys
Visual and audible indicator to acknowledge requested action
Full 3-seconds delay on panic function to reduce false alarms
Certified with ULC Wireless Commercial Burglary Listing under ULC-S304-16 Standard – an industry first in Canada!*
*Only applicable in Canada

DSC PC5003c is the same cabinet that all the DSC Power Series alarm systems come with. It is approximately 12“x 12” and 3” deep. It is the largest cabinet available for the Power Series. This cabinet will hold up to three PC5108 / PC5208 expanders AND one large board such as a PC5204 OR PC5580 AND one small board such as the IT-100 data Interface board. It may be possible to house two large boards, however you would likely have to drill mounting holes for at least one of the boards. This cabinet DOES NOT include a cabinet lock. Cabinet locks are available separately

Long-lasting battery life – up to 5 years with typical use under standard conditions
Auxiliary input can be used to easily connect a standard hardwired contact
IP66 dust-tight and waterproof rating ensures dependable operation even in extreme conditions
Tamper-resistant
Contact and temperature detector in one, when enrolled as part of the PowerSeries Pro system. Temperature is shown on the User App.
Fast installations using link quality LED indicators and pull-tab device auto enrollment
Wide-gap tolerance reduces false alarms caused by wind, or by animals bumping outdoor gates and enclosures
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels

The DSC SD 15W-ULF is a self-contained, surface-mount, untampered dual-tone interior siren. It is designed for household burglar alarm system accessory and also suitable as an audible signal appliance for fire alarm systems. When power is applied to the alarm siren, it produces an audible steady yelp tone according to the wiring.

Programmable temperature warning and alarm thresholds
Detects extreme cold, freezer fault and extreme heat
Provides up to four selectable temperature alert points
Optional probe to monitor refrigerator, freezer and outdoor temperatures
Battery life 7 years with typical use
Visible signal quality indicator helps to choose the optimal location for installation without going back and forth to the keypad
Wall or ceiling mount
Front and back tamper
Fully supervised
Dimensions: 3.19 × 1.25 × 1in.
Compatible with PowerSeries Neo, PowerSeries Pro and Qolsys panels