Search in Category
Filter Your Search
Shop by Category
Alarm Contacts
OVERHEAD DOOR CONTACT,2"GAP,
The ODC-59 Series Overhead Door Contacts are exclusively designed for rugged high traffic installations. The reed switch is hermetically sealed with a PVC shock absorber enclosed within a solid aluminum housing. Installation wires are protected in a 24” stainless steel armored cable. The ODC-59 Series magnet is mounted on an adjustable L shaped bracket designed for greater flexibility, universal mounting, greater pulling power, and to provide a professional installation appearance.
The ODC-59-HG (horizontal gap) is designed as a solution for damaged or loose fitting doors.
The ODC-59 MINI offers all the same great features in a smaller size for greater installation flexibility. (Not ULC listed)
HOLD UP BUTTON W/1 SET DPDT
The Potter HUB-M provides momentary or latching DPDT contacts for actuating surveillance cameras or other security applications. Dimensions: 2” x 2.3125” x 1”. For use with: All DMP XT Series and XR Series Panels.
5,6'GLO RODS W/COUPLERS,WISP &
GRI Creep-Zit 30 ft Threaded Connector Wire Running Rod Kit
TRACK-MOUNT N.C OVERHEAD MAGNETIC DOOR
The Seco-Larm SM-4201-LQ is a track-mount overhead door magnetic contact switch with a 3” gap. The switch is used for overhead doors in both industrial and residential situations where a wide gap is present.
OVHD DOOR CONTACT
The Seco-Larm SM-226LQ is a magnetic contact for overhead doors and screens designed to work with closed loop circuits. The SM-226LQ switch comes in a floor-anchored, cast-aluminum housing that’s durable enough to withstand heavy vehicles passing over it. The magnet is installed in a gray ABS case that comes mounted on an L-shaped bracket. Wire leads are enclosed in a stainless-steel cable for maximum security.
DISCONNECT CORD / 5 PER PACK
The QDC-2 Quick Disconnect Cord is designed for use on overhead doors, gates, and any other opening that cannot be protected by other methods. The QDC-2 is designed to provide years of reliable service. It incorporates a proven design with heavy duty corrosion resistant contacts. The rugged connector system and heavy duty cables will withstand the harshest treatment and environments. It is suitable for both indoor and outdoor applications. The heavy duty cables have successfully withstood bending cycle test of over 2000 cycles.
PLUG TYPE SWITCH N/O - N/C
The Model PTS-C is designed to supervise sprinkler system control valves and may also be used to secure gates and other applications. This unit is particularly useful for unusual conditions, such as non-rising stem valves.
Nema 6P enclosure allows the device to be mounted outdoors, even in areas subject to flooding such as pits and wells. Sealed reed switch operation virtually eliminates contact corrosion.
Turning the valve wheel will pull the plug out of the receptacle. The plug cannot be reinserted after operation until the plug receptacle cover is removed with the special hex key provided. This key should be left with the building owner or responsible party. Replacement or additional cover tamper screws and hex keys are available.
SENSOR DOME SWITCH CLOSED WHITE
GRI DS-01T Short Roller Ball, Terminal Block, Closed Loop
ARMORED WG NC MAGNETIC CONTACT 3" GAP
The Seco-Larm 4601-LQ is an industrial wide-gap magnetic contact switch with a 3” gap and normally-closed contacts.