Shop Hardware Accessories

MagDaddy utilizes Ultra-Strong magnets the same that are used in Aerospace, and Automotive Industries. These magnets for the first time ever are being used for applications in Wire/Cable management, and automotive fastener solutions. These magnets easily stick through oil, grease, paint, and dirt. After placing a MagDaddy Fastener onto a thick piece of steel, i.e. I-Beam, it appears as if it was welded on! MagDaddy products are used in all types of ways from holding down wires and door panels, to holding up signs and coats, as well Mag Daddy products continue to find themselves inside various OEM products.

For single, double drywall, plasterboard and gypsum fibre board Combo drive #2 Phillips
Thin cutting thread; easy and reliable installation in drywall
Back twist lock permits the disassembly of screws without the movement of the plug and drilling in the plate
Center point ensures an easy setting

3/4” Diameter loop bridle ring with 10-24 machine thread secured to a permanent magnet. Used to support communication cable & other non sensitive cables and wires.

MagDaddy utilizes Ultra-Strong magnets the same that are used in Aerospace, and Automotive Industries. These magnets for the first time ever are being used for applications in Wire/Cable management, and automotive fastener solutions. These magnets easily stick through oil, grease, paint, and dirt. After placing a MagDaddy Fastener onto a thick piece of steel, i.e. I-Beam, it appears as if it was welded on! MagDaddy products are used in all types of ways from holding down wires and door panels, to holding up signs and coats, as well Mag Daddy products continue to find themselves inside various OEM products.

The RD3 Kit is suitable for use in solid/hollow wall, concrete, block, or brick applications. When used in hollow walls, such as drywall or plywood, the wings will splay out to provide a more secure installation and higher pull-out load. The anchor has a lip to prevent falling into deep holes or hollow walls. For hard wall applications, use the size of the anchor to determine hole size for installation. For drywall or soft applications it is recommended to use the smallest hole that will enable a tight fit of the anchor. These anchors are not recommended for use in overhead applications or where holding values are critical.

The magnets used in these MagDaddys are very strong and will hold up practically any cable bundle you attach along a wall or even upside down! Even with such a strong hold, they can be pulled off with a little extra force and moved or stored away for multiple uses. The ideal solution for any warehouse, garage, automobile or any where with a steel surface.

Color
Blue
Material
Plastic
Number Of Pieces
201
Specifications
3/16 in Dia
Type
Conical

MagDaddy utilizes Ultra-Strong magnets the same that are used in Aerospace, and Automotive Industries. These magnets for the first time ever are being used for applications in Wire/Cable management, and automotive fastener solutions. These magnets easily stick through oil, grease, paint, and dirt. After placing a MagDaddy Fastener onto a thick piece of steel, i.e. I-Beam, it appears as if it was welded on! MagDaddy products are used in all types of ways from holding down wires and door panels, to holding up signs and coats, as well Mag Daddy products continue to find themselves inside various OEM products.

The WDK8W contains #8 Zinc Anchors and #8 Wafer Head Phillips Drive Sheet Metal Screws. The Wall Board Anchor is manufactured with a fine centered point that helps guide the anchor into the material. It features a unique sharp thread design that allows it to screw directly into drywall with no pre-drilling. It is also a reusable anchor that can be easily installed with a screwdriver or power driven screwdriver.

The 6502P is a 2 ply, rot and mildew resistant pull line that is used to pull rope through conduit. It comes packed in a contractor friendly dispensing pail and can be used with power fishing systems for faster and easier pulling.