Shop DOOR KING | Brands We Sell

Replacement control board for Doorking models 6050, 6100, 6300. The 4502-018 is the replacement for post 2016 UL guidelines. Used on 6050, 6100, 6300 operators only. Terminal strip sold separately.

MicroPLUS Transmitters
268,000,000 codes available.
Encrypted “sync” code changes each time the transmitter is used.
Transmitter button combinations allow a single transmitter to control multiple locations.
PROXmitters combine RF control with a proximity tag.
MicroPLUS controls are not compatible with the Homelink system found in many automobiles
Key ring included with transmitters

Replacement circuit board for 1838 system?Memory chip not included

Replacement control board for Doorking models 6050, 6100, 6300. 4502-012 is the replacement for the 4502-010 DKS control board. Used on 6050, 6100, 6300 operators only. Terminal strip sold separately.

Doorking RF receiver model 8040-080. Multi-purpose RF receiver that will work with both MicroClik and MicroPlus transmitters. For stand-alone applications, a dry contact relay is provided for door or gate operator activation, or for magnetic or electric door strike release. The receiver can also be programmed for 26, 30 or 31-bit weigand output, making it compatible with most access control systems.

The Doorking 1508-123 is a package of 50 key tags that are factory pre-coded. The key tags will work with the following DK Prox readers only: 1815-300, 1815-301, 1815-302, 1815-330, 1815-331, and 1815-305.

The new memory module will be used on the 1830 series entry systems. It will function identically to the old memory chip, which is obsolete, and plugs into the current memory chip socket. The arrow on the module is to be pointed UP, much like the dot and notch on the old chip.

The new module also has an LED labeled ACT, which flashes when the 1830 systems processor is accessing the memory module (like a hard drive LED on a computer).

The new module is interchangeable with the old memory chips and can be used in older phone systems. Part numbers for the old chip and new memory module are shown below.

Used with Doorking 1834 system

The DoorKing 9410-010 single channel loop detector is designed for exclusive use with DoorKing vehicular gate operators and control an individual loop (including 2 series wired reversing loops configuration). The 9410-010 plugs into loop detector ports on the grate operator control board. The “self-tuning” unit will constantly monitor the loop’s frequency status and “self-tune” for any minor deviations with the frequencies to keep the loop operating normally and decrease false calls.

1-Button
HID tag
Sold in lots of 10 only
268,000,000 codes available.
Encrypted “sync” code changes each time the transmitter is used.
Transmitter button combinations allow a single transmitter to control multiple locations.

Proximity cards do not require direct contact with the card reader and the passive, battery-free design affords an infinite number of reads. These high quality proxcards, unless physically abused, will last virtually forever. DoorKing 1508-110 (DKS 170, RF 170) IDTeck Clamshell Proximity Cards are a cost-effective solution to proximity access control.