Shop SECURITRON MAGNALOCK CORP | Brands We Sell

Post Shim Brackets are used to adapt both small and large Post Brackets to pole/post sizes smaller than 2” or 3” respectively in 1/8” increments – 1-7/8”, 1-3/4”, 1-5/8” 2-7/8”, 2-3/4”, 2-5/8”, etc. When more than two shims are used together on a single post, welding the bracket to the pole/post is recommended. All necessary mounting hardware including four Post Shims is included with each Flex-Mount Kit.

The model PB3 is a spring loaded momentary rectangular exit button, with bi-color illumination, mounted on a stainless steel single gang outlet box cover. The red and green lamps can be individually operated according to the needs of the installation. The red lamp is an LED mounted above the button and the green lamp is an LED, illuminating the button itself. The PB3 can be used for momentary release of fail safe or fail secure electric locks. If interfaced with a release hold timer, such as Securitron’s TimeMate, it can provide for timed release of electric locks. It may also be used to input a REX (request to exit) signal to a card reader system.

The PZ1 can be used as a local or remote alarm sounder for exit delay or door prop alarm.

The model PB2 is a spring loaded momentary 2” square, exit button, mounted on a stainless steel single gang outlet box cover. The SPDT contacts switch when the button is depressed and return when it is released. The contacts are UL listed with 5 AMP capacity. The indicator LED is mounted above the button and the switch LED illuminates the button itself.
The indicator LED and switch LED can be individually operated according to the needs of the installation. The PB2 can be used for momentary release of fail safe or fail secure electric locks. If interfaced with a release hold timer, such as Securitron’s TimeMate, it can provide for timed release of electric locks. It may also be used to input a REX (request to exit) signal to a card reader system.

The Securitron M38 is a 600 lbs. holding force Magnetic lock with automatic dual voltage. This model offers a built-in wire access chamber and bracket mount design for a unique and simplified method of installation. Recommended for applications where physical assault on the door is not expected, like access controlled interior rooms and secure areas within buildings.

Securitron TS-5-CBO TSB Series Replacement Sensor, for TSB-3 Series Touchbars,Replacement for TS-4

Securitron TSB-BCA Touch Sense Bar Mounting Base and End Cap, 36 Inch
Features: Flexible; Armored; Tamper Resistant
For Use With: Power Transfer Between a Door Frame and the Door
Cable Length: 18 Inch
Protection Type: Gray and Black End Caps

The XMS passive infrared (PIR) motion sensor request to exit (REX) device reliably detects motion near a door and releases its lock. Versatile mounting options and an easily adjustable infrared beam pattern provide optimal coverage of the egress area for smooth, hands-free lock release and exit.