Shop Access Control Accessories

The Alarm Controls DL-2 is an access control door loop. Easy installation hardware and die-cast end caps are included. Abrasion-resistant steel coats the door loop.

A light gray trim plate used when mounting the detector over a standard single-gang box.

Keri’s LAN-520 provides Ethernet connectivity for PXL and Entraguard controllers using a plug-in, Ethernet module to replace direct RS-232 serial connections or (now obsolete) modem connections for data transfer between doors.NET software and the controllers themselves. All PXL and Entraguard controllers can be connected, individually, via TCP/IP to take advantage of the existing Ethernet LAN/WAN.

The Seco-Larm SD-969-S18Q is an 18” armored door cord with aluminum end caps.

The Kanto PT300 is a dual-stud, tilting wall mount designed to support TVs up to 90 inches. Its pre-tensioned mounting brackets provide 12° of forward tilt, helping to reduce glare and improve line-of-sight with your TV. Each bracket is equipped with a horizontal leveling screw to facilitate precision leveling, a Torx screw and locking feature to protect against theft, and a quick-release cord for easy removal of your TV making this a versatile lockable TV mount. Sitting 1.4 inches from the wall, the PT300’s wall plate is wide enough to accommodate both 16 and 24-inch stud spacing, and comes with all the hardware you need for wood stud and concrete installation.

Weather resistant
Vandal-resistant
Inside space for cabling
Mounts to flat wall surface
Opening at bottom for drainage

Door release activation for LEF Series
Normally open contact output

The Securitron XDT-24 is a configurable exit delay timer that operates on 24 VDC and is compatible with entry Control, door/Lock monitoring, and authorized immediate exit. The XDT-24 is ideal for fail-safe environments that have varying needs throughout the day and is widely used in healthcare environments to alert for patient exit and in retail environments to prevent theft

The Securitron FMK-SW is a flex-mount bracket kit for a swing gate. The kit is designed exclusively for use with the M62FG Magnalock and the GL1 Gate Lock.

All necessary mounting hardware, including four post shims, is included with each FMK-SW kit and streamlines the process for installing a professional looking, high security gate lock mounting platform in minutes without any special tools.

Keri’s KPS-3 Power Supply provides an open frame power solution with an ultra compact footprint, providing your design with more space and efficiency. The Power Supply provides 12VDC @ 2.8A and has a 1.5A battery charging circuit. The supply has a perforated cover (for cooling) mounted in standard Keri enclosure (no enclosure option available). It works with the PXL-500, NXT, and NXT-MSC controllers. It supports a direct 100 VAC to 240 VAC input at 50 Hz and 60 Hz, no transformer required.