Shop Distribution

Sav9D Power Supply provides 12VDC distributed via nine (9) Class 2 Rated PTC protected power limited outputs for powering surveillance cameras.

The AQDX series are heavy-duty, self-contained, efficient, clean, offline Switching power supplies, with linear-type performance, and are jumper selectable between 12 VDC at 6A and 24 VDC at 6A. The AQDX series have a dedicated lead acid battery(s) charger that obtains maximum battery life while providing 12 VDC or 24 VDC uninterruptible power for access Control security systems. The field selectable AC input on AQD2, 4, and 6 models allows these power supplies to be powered anywhere in the world. The AQDX series have exceptional brownout capability with operation down to 85% of nominal voltage. The AQDX series have an extensive filtering system that provides linear output performance, and they are electronically protected against battery reversal, shorting, or overloading. All variants are Power limited output with thermal protection, AQD6 is power limited only when used with a Distribution board. Each of these protective features will self-restore.

Altronix PD8UL UL Listed Sub-Assembly power distribution module is designed to convert a single AC or DC input into eight (8) individually fuse protected outputs.

100-240V
Input: 50/60Hz 0.8A
Output: 12V 2.5 AMP
UL Listed

100-240V
Input: 50/60Hz 0.5A
Output: 12V 1 AMP
UL Listed

Sav182D Power Supply provides 12VDC distributed via eighteen (18) Class 2 Rated PTC protected power limited outputs for powering surveillance cameras.

Altronix PD4 power distribution module is designed to convert a single AC or DC input into four (4) individually fuse protected outputs.

Sav4D Power Supply provides 12VDC distributed via four (4) Class 2 Rated PTC protected power limited outputs for powering surveillance cameras.

Altronix MOM5 power distribution module converts one (1) non power-limited DC voltage input to five (5) power-limited outputs. Each output will route power to a variety of access control hardware and devices which includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both fail-safe and fail-secure modes. Controlled trigger input is achieved through normally open (NO) or normally closed (NC) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output relay will enable HVAC Shutdown, Elevator Recall or trigger auxiliary devices.

Pull Strength 16 lbs
Premium Polymer
Standard cable tie slot
Easy, fast installation
Labor time savings
No drilling, welding required
Ability to Rotate 360°
Can Be Reused and Repositioned