Shop Fire Accessories

The Smoke Centurion Smoke Detector Tester (M8) is an aerosol tester that checks the functionality of smoke detectors. Smoke detector testing with Centurion is fast and easy-to-use. It can be used handheld or with help from a dispenser. The Smoke Centurion can be used to test a wide range of smoke detectors and is silicone free, which reduces the risk of detector contamination.
More tests per can
Fast detector activation
Lowest cost per test
Either hand-held or with use of a dispenser
Silicone free testing, reduces risk of detector contamination
Formula approved by leading detector manufacturers
High eco responsibility: ozone friendly (no CFCs) and low GWP propellant
Sold in cases of 12

The Smoke Sabre smoke detector tester offers the lowest cost per test of any of the detector testers offered at SDi Fire. The Smoke Sabre is silicone free and 100% biodegradable. Each smoke detector tester is easy to use and does not cause buildup on the detectors.
Detector manufacturer endorsed
Fast detector activation
The end of harmful residue – risk is designed out with the Sabre
Silicone free smoke detector testing, reduces risk of detector contamination
Eco-responsibility – 100% bio-degradable Sabre, ozone friendly, no CFCs and low GWP
Sold in cases of 12

BlowOut hand-held air duster is perfect for use with fire alarm equipment. Complete with a directional straw that allows for access of hard to reach areas, BlowOut is available in a large 10oz can.
Removes dirt and dust from fire detectors
Large 10 oz can
No CFC’s
Silicone Free
Sold in cases of 12

Features:
Very low current draw
Dual Voltage inputs
Terminal block connections
High holding force
Low residual magnetism
Powder coated finishes (optional)
Extension and misalignment rods (optional)
Surface mount back box (optional)
Time saving drill fixture (optional, for mounting catch plate)

SoloC6 provides a fast and simple way of meeting the requirements of the new legislation by introducing real CO to the sensing cell of the detector. As the world’s first UL Classified CO detector tester, SoloC6 is the professionals’ choice for ultimate peace of mind in ensuring the detector is functioning correctly and protecting the lives of those around it.
Genuine and non-flammable CO gas
Fast test and re-set time
Controllable and safe CO detector testing
Only CO tester approved for System Sensor 1224T / A / R CO detectors & Interlogix SpaceAir 250 CO Alarms
Detector manufacturer endorsed
UL Classified

Features:
Enclosure is durable and reliable
Helps protect important documents such as system information, building layouts and more
Offers the convenience of having documents readily accessible for authorized personnel

The UL Listed SECO-LARM Magnetic Door Holders are designed for virtually any remote door release applications, whether residential or commercial. Fail-safe operation, tri-volt coils, and adjustable armature plate allows for easy and flexible installation.

STI-1100 consists of a clear, tamperproof, super tough polycarbonate cover, frame and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).

Multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of system interfacing.

The RSG RMS-1T-LP is a Manual Pull Station featuring optional break glass rod. 1T= SPST contacts with terminal block. The RMS manual pull station is a high quality, non toxic, die-cast manual pull station manufactured entirely in the United States. Low profile design and smooth edges offer an attractive yet functional design. All components are pre-painted or have plated surface to inhibit corrosion. The RMS manual pull station is unbeatable with 10 amps snap action switch offered in all possible contract arrangements (including gold contacts). The RMS pull station can be used with or without a break glass rod, with replacement requiring no special tools.