Alarm.com SEM VISTA DUAL PATH US - AT&T CAT-M
Product Info
ADEMCO VISTA GATEWAY
The alarm.com ADC-SEM300-VT-AT is a dual-path system enhancement module (SEM) designed to migrate compatible Honeywell/Ademco VISTA-10P, VISTA-15P, VISTA-20P and VISTA-21iP panels to alarm.com’s award-winning interactive services. The ADC-SEM300-VT-AT dual-path SEM supports the AT&T 4G LTE cellular network and optional broadband ethernet. The multiple paths ensures the longest life cycle with the most secure and reliable service. The SEM is now ETL certified, ensuring a high benchmark of safety and sustainability.
The SEM300 enable wireless reporting of alarms and other system events using the LTE wireless (cellular) network and Broadband Ethernet. With the SEM300 you can configure and support installations from any browser or smartphone using alarm.com’s familiar and easy-to-use web and mobile support tools, including the Partner Portal and MobileTech app. And, enable alarm.com interactive monitoring and alerting for end-users. Lastly, you can integrate alarm.com’s home automation and energy management services with the SEM’s built-in Z-Wave Plus capabilities.
For remote programming to be available, the panel must support the downloader feature. This feature is available on most panels with a minimum of v5.2. The SEM300 is compatible with Honeywell/ADEMCO panels and the equivalents, dating back to 2005. The Honeywell/ADEMCO VISTA-21iP is also compatible when the Internal IP/GSM jumper switch is set to the OFF position.
Features:
Fast, reliable, and secure wireless signaling
Cellular 4G AT&T LTE primary communication path
Broadband as an optional secondary communication path
Remote monitoring and control using the website and app
Remote panel configurations with Uploader/Downloader, including Add Sensors
Remote access and management of locally saved user codes
Home automation and energy management
Support for Z-Wave Plus devices
Video monitoring
Cover and wall tamper included
Externally facing LEDs for visual feedback
Internal Antennas
No separate power supply needed
Over the air (OTA) upgrades
CID and SIA central station signaling
Enable alarm.com interactive monitoring and alerting for end users
ETL Listed to UL985, UL1023 and ULC S545
Configure and support installations from any browser or smartphone using alarm.com’s familiar and easy-to-use web and mobile support tools, including the Partner Portal and MobileTech
Specifications:
Enclosure Dimensions (L x W x D): 7.66 × 4.35 × 1.65 in. (19.46 × 11.05 × 4.19 cm)
Enclosure Color: White
Case Material: Fire-retardant PC/ABS, PC
Compatibie: Honeywell/Ademco VISTA 10P, 15P, 20P and 21iP panels (manufactured 2005 or later and version 3.1+)
Not Compatible: POTS. The SEM should be the only communication path for alarm signaling to the GeoArm monitoring station.
Power Requirements: 12 V nominal, 125 mA nominal (continuous), 230 mA max
Cellular Network: AT&T 4G LTE-M with 3G HSPA, 2G GSM fallback
Panel Interfaces: Two keypad BUS connections, 12 V power and ground
Enclosure Interfaces: Five LEDs (red, green, yellow, or blue)
alarm.com Module Indicators: One module/panel communication status LED, one module power LED, one automation LED, three wireless communication status LEDs
SEM Circuit Board Indicators: One LAN LED, one processor LED, one COMM fail LED
Z-Wave Frequency: 908.4 MHz
Operation temperature: 14° – 131° F (-10°C – 55°C)
Storage temperature: -30° – 140° F (-34°C – 60°C)
Humidity: 90% relative humidity, non-condensing
Export To PDF