Alarm.com TABLETOP SMART GATEWAY
Product Info
TABLETOP SMART GATEWAY
The alarm.com ADC-SG130 is tabletop smart gateway designed for alarm.com video surveillance products. With the ADCSG130 gateway in place, you can change internet service providers, or change WiFi credentials which cause the cameras to lose connectivity (and thus cannot be accessed) using the GeoArm alarm.com portal. With this device (ADC-SG130), we create a dedicated network just for the cameras. If the customer makes changes to their WiFi settings, no need to send a truck, since this is plugged into their existing router so the cameras will keep working. If the customer changes their internet service provider, they need only re-plug this device into their new router.
With a reliable wireless connection and excellent range, the ADC-SG130 makes it easy to install any alarm.com Wi-Fi camera. The ADC-SG130 features WPS, eliminating the need to update cameras with complicated router passwords. Simply plug the ADC-SG130 into any wall outlet, connect to the existing router, pair with a WiFi camera, and enjoy instant, secure connectivity.
Features:
WiFi Access Point (2.4 GHz)
Reliable network for alarm.com WiFi cameras, ensuring cameras stay connected when the homes network SSID, password, or ISP changes
Remote management and troubleshooting
Enhanced customer experience
Specifications:
Ethernet Connection: 10/100 Mbps (fast) WAN connection
WiFi Connection: 802.11 b/g/n, 2.4 GHz
Dimensions without plug (H x W x D): 3.5 × 3.1 × 1.2” (11.6 × 8.0 × 3.1 cm)
LED Indicators: 4
Buttons: Function, WPS, Reset
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Operating Humidity: 0 to 80% (non-condensing) RH
Power: 12 VDC Power Adapter
Network: Broadband Internet connection with router
Network size: Up to 4 cameras recommended
Power LED Status: On – Device is powered on | Off – Device is powered off | Flashing – Device is booting
Data/Ethernet LED Status: On/Flashing – Device transferring/receiving data over Ethernet. | Off – No data is being transferred over Ethernet. Please check the Ethernet connection between the Smart Gateway and the router.
Communication LED Status: On – Connected to Internet | Off – No local or Internet connection | Flashing (slowly) – Local connection, no internet | Flashing (five quick blinks) – Communication test initiated
WiFi LED Status: On – Active | Off – Inactive | Flashing – WPS mode
Additional States LED Status: All LEDs flashing (escalating) – Firmware upgrade in progress | All LEDs flashing (simultaneously) – Reset in progress
Included:
ADC-SG130 Smart Gateway
Power Adapter
Ethernet cable
Quick Installation guide
Export To PDF