ALARM.COM SMART WATER VALVE PLUS METER
Product Info
ALARM.COM SMART WATER VALVE PLUS METER
The alarm.com ADC-SWV150 is a smart water valve and meter that provides peace of mind that your home is protected against water damage. With the ADC-SWM150 installed you can set up rules to automatically shut off your water when a water sensor detects a leak. From anywhere and at anytime you can use the alarm.com app to easily turn your water on or off remotely. The ADC-SWM150 uses cutting-edge connected technology to detect leaks and shut them off automatically. As part of alarm.com’s whole-home Water Management solution, it can respond intelligently to drips and leaks in different areas of your home, and helps you use water more efficiently with monitoring and insights.
Features:
Whole-home leak detection
Water consumption monitoring
Automatic water damage prevention
Open/close water valve remotely
Automatically shut off the water when paired with a water sensor
Modular design
Water sensor (sold separately, not required)
Z-Wave Plus communication
Z-Wave S2 security protocol
Specifications:
Control Unit Dimensions: 2.75 × 4.0 × 1.25” (6.99 × 10.2 × 3.18 cm)
Meter and Valve Dimensions (with Enclosure): 11 × 5.75 × 3.75” (27.9 × 14.6 × 9.53 cm)
Actuator and Valve Dimensions: 4.5 × 2.0 × 3.75” (11.43 × 5.08 × 9.53 cm)
Maximum Compatible Pipe Size: 1.25” (3.175 cm)
Power Supply Cable Length: 19.7’ (6 m)
Power Requirements: 100-240 VAC (50/60 Hz)
Operating temperature: 14° – 185° F (-10°C – 85°C)
Operating humidity: 0% to 95% non-condensing
Requirements: For indoor use only, Expansion tank for water heater
Compatible: alarm.com system
Restrictions: For indoor use only
Valve Size: 1”
Valve Threads: Male NPT
Plumbing Certifications: ICC-ES-PMG (compliance with NSF 61 and NSF 372), Massachusetts Accepted Plumbing Products Registry
Included:
ADC-SWM150 Control Unit
Brass valve and meter
Plastic enclosure
Actuator
Mounting plate
Drywall anchors & screws (x2)
Cable ties (x3)
Power adapter
Installation guide
- Additional parts required: Installation requires fittings to connect the ends of the valve to the pipe. The type of fittings needed will depend on the existing pipe size, material, and threading type as well as applicable plumbing codes.
Export To PDF