ALTRONIX CORPORATION ACCESS CONTROLELR 8 OUT FACP
Product Info
UL RECOGNIZED ACCESS POWER CONTROLLER. (8) FUSED ACCESS CONTROL SYSTEM OUTPUTS WITH FACP INTERFACE FOR ACCESS CONTROL APPLICATIONS. (8) ACCESS CONTROL SYSTEM TRIGGER INPUTS. FIRE ALARM DISCONNECT. BOARD DIMENSIONS 8“L X 4.5“W X 1.25“H
Altronix ACM8 converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes.
Features
Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
Fire Alarm disconnect input options:
a) Normally open (NO) or normally closed (NC) dry contact input.
b) Polarity reversal input from FACP signaling circuit.
FACP output relay (form “C” contact rated @ 1A 28VDC not evaluated by UL).
Removable terminal blocks facilitate ease of installation.
Visual Indicators
Red LEDs indicate outputs are triggered (relays energized).
Green LED indicates FACP disconnect is triggered.
Temperature
Operating: 0° C to 49° C (32° F to 120° F).
Storage: – 20° C to 70° C ( – 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.): 4 BTU/Hr.
Input
12 to 24 volt AC or DC operation (setting not required), (0.6A 12volt, 0.3A 24 volt current consumption with all relays energized).
*AC applications not evaluated by UL.
Main fuse is rated at 10/250VA.
Power supply input options:
a) One (1) common power input (board and lock power).
b) Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).
Eight (8) Access Control System trigger inputs:
a) Eight (8) normally open (NO) inputs.
b) Eight (8) open collector sink inputs.
c) Any combination of the above.
Output
Eight (8) independently controlled 2.5A outputs:
a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
b) Eight (8) dry form “C” 5A rated relay outputs
c) Any combination of the above
Eight (8) auxiliary power outputs (unswitched).
Output ratings:
Fuses are rated 3.5A each.
Note: Total output current is determined by the power supply, not to exceed a maximum of 10A total.
Export To PDF