Altronix AL1012ULXPD16 Power Supply Charger, 16 Fused Outputs, 12VDC @ 10A, 115VAC, BC400 Enclosure
Product Info
12VDC @ 10 AMP 115VAC INPUT AC AND BATTERY MONITORING. SIXTEEN (16) FUSE PROTECTED OUTPUTS GREY ENCLOSURE 15.5?H X 12?W X 4.5?D. UL/CUL LISTED (UL294).
AL1012ULXPD16 is a multi-output power supply/charger that converts a 115VAC, 60Hz input into sixteen (16) 12VDC non-power limited outputs.
Input
Input 115VAC, 60Hz, 1.9A.
Input fuse rated @ 5A/250V.
Output
12VDC output.
10A continuous supply current.
Sixteen (16) fuse protected outputs.
Output fuses are rated @ 3.5A/250VAC.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery Charging
Built-in charger for sealed lead acid or gel type batteries.
Maximum charge current: 0.7A.
Automatic switch over to stand-by battery when AC fails.
Zero voltage drop when switched over to battery backup.
(Batteries are sold separately).
Supervision
AC fail supervision (form “C” contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form “C” contacts).
Battery presence supervision (form “C” contacts).
Visual Indicators
AC input and DC output LED indicators.
Temperature
Operating: 0 to 49° C (32 to 120° F ).
Storage: – 20 to 70° C ( – 4 to 158° F).
Relative Humidity: 85% +/- 5%
BTU/Hr. (approx.): 61 BTU/Hr.
System AC input VA requirement: 299VA.
Enclosure:
Wall mount enclosure for indoor use.
Dimensions 12.25“W x 15.5“H x 4.5“D (311 mm W x 394 mm H x 114 mm D).
1.125” and 1.375” combination knockouts.
Weights (approximate):
Product Weight: 9.3 Lbs. (4.22 kg).
Shipping Weight: 11.6 Lbs. (5.26 kg).
Export To PDF