ALTRONIX CORPORATION UL FIRE PS 24VDC 10A AC/BATT SUP W/ENCL
Product Info
24VDC @ 10 AMP 115VAC INPUT AC AND BATTERY MONITORING NON-POWER LIMITED OUTPUT RED ENCLOSURE 15.5“H X 12“W X 4.5“D. UL/CUL LISTED (UL294) (UL1481). CSFM AND MEA APPROVED.
AL1024ULXR is a power supply/charger that converts a 115VAC, 60Hz input into a single 24VDC non-power limited output.
Input
Input 115VAC, 60Hz, 4.2A.
Input fuse rated @ 3.5A/250V.
Output
24VDC output.
10A of continuous supply current for Access Control applications.
8A of continuous supply current for Fire Alarm applications.
Filtered and electronically regulated output.
Short circuit and thermal overload protection.
Battery Backup
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Supervision
AC fail supervision (form “C” contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form “C” contacts).
Battery presence supervision (form “C” contacts).
Visual Indicators
AC input and DC output LED indicators.
Temperature
Operating 0 to 49° C (32 to 120° F ).
Storage – 20 to 70° C ( – 4 to 158° F).
Relative Humidity 85% +/- 5%
BTU/Hr. (approx.): 123 BTU/Hr.
System AC input VA requirement: 483VA.
Enclosure:
Wall mount enclosure for indoor use.
Accommodates up to two (2) 12VDC/12AH Batteries.
Dimensions 12.25“W x 15.5“H x 4.5“D (311 mm W x 394 mm H x 114 mm D).
1.125” and 1.375” combination knockouts.
Weights (approximate):
Product Weight: 9.25 Lbs. (4.2 kg).
Shipping Weight: 11.55 Lbs. (5.24 kg).
Export To PDF