ALTRONIX CORPORATION TWO (2) OUTPUT PWR SUPPLY/CHARGER W/FIRE
Product Info
TWO (2) OUTPUT POWER SUPPLY/CHARGER WITH FIRE ALARM DISCONNECT – 12VDC OR 24VDC AT 4 AMP MAX ADDITIONAL SEPARATE 1 AMP AUX. CLASS 2 RATED POWER-LIMITED OUTPUT AC & BATTERY MONITORING LOW POWER SHUTDOWN OVER VOLTAGE PROTECTION (OVP) 115VAC INPUT UL
Altronix eFlow4NB UL Listed Sub-Assembly power supply/charger converts 120VAC, 60Hz input into a single 12VDC or 24VDC Class 2 Rated power-limited output. It also offers a suite of features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.
Input Rating
Input 120VAC 60Hz, 3.5A.
Output
Class 2 Rated power-limited output.
12VDC or 24VDC selectable output.
4A continuous supply current.
Aux. Class 2 Rated power-limited output rated @ 1A (unswitched).
Overvoltage protection.
Filtered and electronically regulated outputs.
Battery Charging
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Transfer to stand-by battery power is instantaneous with no interruption.
(Batteries are sold separately).
Fire Alarm Disconnect
Supervised Fire Alarm disconnect (latching or non latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
Supervision
AC fail supervision (form “C” contacts).
Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
Battery fail & presence supervision (form “C” contacts).
Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.
Electrical
Temperature:
Operating: 0° C to 49° C (32° F to 120° F).
Storage: – 20° C to 70° C ( – 4° F to 158° F).
Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.):
12VDC: 25 BTU/Hr.
24VDC: 49 BTU/Hr.
Visual Indicators
Green AC Power LED indicates 120VAC present.
AC input and DC output LED indicators.
Additional Features
Short circuit and overload protection.
Dimensions (approximate):
4.6“W x 7.5“L x 1.75“H (116.84 mm W x 190.5 mm L x 44.45 mm H).
Weights (approximate):
Product Weight: 0.85 Lbs. (0.39 kg).
Shipping Weight: 1 Lbs. (0.45 kg).
Export To PDF