Altronix Pace1PRMT Long Range Ethernet Single Port Adapter Kit, 100Mbps, Passes PoE/PoE+, Includes Receiver & Transceiver
Product Info
Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100Mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE() compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE() compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.
Input
Pace1PRM:
Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).
Pace1PTM:
Powered by Pace1PRM.
Ethernet
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT5 or 1 pair UTP structured cable.
Distance: up to 500m (1,600 ft.).
Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace1PRM to Pace1PTM by PoE protocol.
Throughput is rated to pass 100Mbps of data at distances up to 500m (1,600 ft.)
CAT5e or higher
Distance: up to 500m (1,600 ft.) @ 100Mbps.
UTP (single pair)
Distance: up to 152m (500 ft.) @ 100Mbps.
LED Indicators
Pace1PRM/Pace1PTM: Green – PoE ON (by respective RJ45 jack).
Pace1PRM and Pace1PTM (RJ45 jack): Yellow and Green LED IP Link status, 10/100Base-T/active.
Temperature
Operating Temperature:
Pace1PRM:
- 20ºC to 49ºC (— 4ºF to 120.2ºF).
Pace1PTM:
15W: – 40ºC to 75ºC ( – 40ºF to 167ºF)
25W: – 40ºC to 70ºC ( – 40ºF to 158ºF)
30W: – 40ºC to 60ºC ( – 40ºF to 140ºF)
Storage Temperature:
-40ºC to 75ºC (-40º to 167ºF).
Relative humidity: 85%, +/- 5%, non-condensing.
Operating Altitude
- 304.8 to 2,000m.
Functions
Auto detection and protection of legacy non-PoE cameras/devices.
Enclosure:
Modular plastic case. VB6
Dimensions 3.5“W x 1“H x 3.5“D (88.89 mm W x 25.4 mm H x 88.89 mm D).
Weights (approximate):
Product Weight: 0.24 Lbs. (0.11 kg).
Shipping Weight: 0.42 Lbs. (0.19 kg).
Export To PDF