ALTRONIX CORPORATION 24DC LOCK OUTPUT W/VERY HIGH INRUSH REQ.
Item #:
AL-STRIKEIT2
Product Info
ALSTRIKEIT2
ALTRONIX CORPORATION
STRIKEIT2
1 – 24VDC CONTROLLED LOCK OUTPUT FOR PANIC HARDWARE DEVICE W/VERY HIGH INRUSH REQUIREMENTS. 1 – DELAYED MOMENTARY RELAY OUTPUT 1 – 24VDC AUX OUTPUT RATED@.5A ENCLOSURE 8.5“HX7.5“WX3.5“D. 115VAC INPUT.
Strikelt2 operates one (1) 24VDC panic hardware device. It is designed to handle the high current surge panic hardware locking devices demand. In addition, an auxiliary power output provides power for accessory devices such as card readers, keypads, REX PIRs, electronic timers, relays, etc.
Input
115VAC 60Hz, 7A.
One (1) N/O trigger input.
Output
One (1) 23.2-24VDC lock output rated up to 16A for 300ms, 0.5A continuous hold current.*
One (1) 23.2-24VDC filtered regulated auxiliary output rated @ 0.5A continuous supply current. *
- Note: Total combined current for the outputs may not exceed 1A.
Battery Charging
Battery leads included.
Built-in charger for sealed lead acid or gel type batteries.
Automatic switch over to stand-by battery when AC fails.
Maximum charge current 0.3A.
When 4AH batteries are used, battery capacity for emergency stand-by is at least a 1/2 hour.
(Batteries are sold separately).
Visual Indicators
Green AC Power LED indicates 115VAC present.
Red LED indicates presence of 24VDC.
Temperature
Operating: 0° C to 49° C (32° F to 120° F).
Storage: – 20° C to 70ºC ( – 4° F to 158° F).
Relative Humidity: 85% +/- 5%.
BTU/Hr. (approx.): 151 BTU/Hr.
System AC input VA requirement: 805VA.
Enclosure:
Wall mount enclosure for indoor use.
Accommodates up to two (2) 12VDC/4AH Batteries.
Dimensions 7.5“W x 8.5“H x 3.5“D (191 mm W x 216 mm H x 89 mm D).
1/2” and 3/4” combination knockouts.
Weights (approximate):
Product Weight: 4.65 Lbs. (2.109 kg).
Shipping Weight: 5.75 Lbs. (2.608 kg).
Export To PDF