BOSCH SECURITY (DETECTION SYS) RECESS MOUNT PIR DETECTOR
Product Info
30’ RECESSED MOUNT PIR
The Bosch DS915 PIR detector is designed to mount in a standard single gang electrical box or directly to a wall using the supplied flush mount ring. It uses alternate polarity pulse count processing, is internally pointable and uses grooves-in Fresnel lenses to provide six different coverage patterns.
Features:
Pulse count of one, two, or three
Five field-changeable Fresnel lenses
Semi-flush in standard switch box
Ideal for new construction
Internal vertical and horizontal pointability
Specifications:
Dimensions: 12.5 cm x 8.4 cm x 2.0 cm (4.875 in. x 3.25 in. x 0.625 in.)
Material: High impact ABS plastic enclosure
Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 26 MHz to 950 MHz at 50 V/m.
Height Range: 2 m to 2.6 m (6.5 ft to 8.5 ft) recommended
Pattern Pointability: Coverage is adjustable +2 to -14 vertically, 10 horizontally
Current Draw: 20 mA at 12 VDC
Voltage: 10 VDC to 15 VDC
Alarm Output: Normally-closed reed relay rated at 3.0 W, 125 mA at 28 VDC for resistive loads and protected by a 4.7 resistor in the common C leg