Bosch MOTION PIR / MICROWAVE PANORAMIC VIEW
Product Info
70’ DIAMETER CEILING MOUNT TRITECH – WHITE
REPLACED DS9360
The Bosch DS9370 is a ceiling-mount, panoramic microwave motion sensor with an adjustable coverage pattern that lets users customize the unit to fit their motion detection needs.?The DS9370 is commonly used by home and business owners because it’s relatively inexpensive, easy to install, and can monitor motion over a large surface area. The sensor can be mounted on ceilings up to 25 feet high and, thanks to enhanced processing technology, it quickly differentiates between the movement of human and non-human targets, thus avoiding false alarms. Pattern recognition is used to identify and ignore repetitive false alarm sources. ?The chassis is modular, and its hinged mounting base design provides easy access to field setup switches and wiring.
Features:
Up to 25 (7.6 m) mounting height
Fully-adjustable optical arrays for coverage customization
Hinged chassis and base plate for easy installation
High-efficiency LED and light-pipe system for easy walk testing
First Step Processing (FSP)
Microwave adaptive processing
360 × 70 (20 m) diameter pattern
The high-efficiency LED and light-pipe system provide walk test indication that is easily viewable from any angle and at any mounting height
The alarm memory feature allows the detector to latch the alarm LED to aid in response
The walk test LED can be activated remotely by a control panel command
Specifications:
Dimensions: Height: 3.5 in. (8.9 cm); Diameter: 7 in. (17.8 cm)
Input Power: 9 VDC to 15 VDC, 19 mA standby, 39 mA in alarm with LEDs enabled, and 39 mA maximum current. Use only a Listed limited-power source.
Standby Power: There is no internal standby battery. An external standby battery capacity of 29 mAh is required for each hour of standby time needed. For UL Listed product installations, 4 h (116 mAh) must be provided by the control unit or a UL Listed limited-power source.
Sensitivity: Low and high settings.
Alarm Relay: Silent-operating Form C relay. Contacts rated 125 mA, 28 VDC, 3 W maximum for DC-resistive loads. The contacts transfer on alarm for a period of 4 sec.?Note: Do not use with capacitive or inductive loads.
Tamper: Tamper switch is normally closed (NC), with cover on. A ceiling tamper is included for surface mounting. Contacts rated at 28 VDC, 125 mA, 3 W maximum.
Supervision Features:?-Microwave: The complete circuit operation of this subsystem is checked approximately every 4 h.?-PIR: The detector defaults to PIR technology protection if the microwave subsystem fails. The detector indicates an alarm using the green LED only and activates the alarm relay.
Temperature Range: The storage and operating range is 40oF to +120oF (40C to +49C). For UL Listed installations, the temperature range is (+32oF to +120oF (0oC to +49oC)
Microwa
Export To PDF