CINCH Systems, Inc 319MHZ WIRELESS WATER SENSOR
Product Info
The WIRELESS WATER SENSOR is designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most probable.
Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed for the unit to signal an alarm condition. The output on the RF- WATER-319-NN will remain in alarm state until the moisture bridge is broken. As sensitive as the WIRELESS WATER SENSOR is, it will not alarm due to high humidity or condensation. The WIRELESS WATER SENSOR is ideal for use in homes, offices, computer rooms, warehouses, etc.
Features:
Water detection when liquid makes contact with probe. Contacts above floor level to prevent false floor condensation detection.
Checks for water constantly, requires two positive checks for a valid alarm.
Battery checked every hour.
Batteries (2) CR2032.
Tamper Switch: Located inside transmitter.
Specifications:
Power Requirement: Batteries: 2 – CR2032 Approximate Battery Life; 5 years
Replace Batteries: (2) Panasonic CRT2-32, Energizer CR2032, or Duracell DL2032
Code Outputs: Tamper, Tamper Restore, Alarm, Alarm Restore, Low Battery
Transmitter Frequency: 319.5 MHz
Supervisory Keep-Alive Interval: Every 60 Minutes
RF Peak Field Strength: Typical 36000 uV/M at 3 m
Operating Temperature: 32° to 122°F (-40° to 60° C)
Maximum Cable Length: 72”
Packaging Weight: .158 lbs.
Transmitter Dimensions: 2.71” H x .95” W x .56” D
Probe Dimensions: .7” W x 1.77” L x .38” D
Mounting Probe: Can be mounted to wall surfaces using mounting screws or adhesive tape provided. ABS Plastic
Case Material: ABS plastic
Export To PDF