CONTROLSOFT LIMITED Miniprox Proximity Reader, Grey, Pigtail
Product Info
Features:
Accepts 5- to 16-volts, meeting most voltage requirements.
Available with Wiegand or Clock-and-data interface.
Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
Mounts directly onto metal with no change in read range performance.
Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version).
Available with Wiegand or Clock-and-Data interface.
Potted reader suitable for indoor or outdoor use.
Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed.
Specifications:
Power requirements: 5-16 VDC
• Dimensions: 6.0 ? x 1.7 ? x 1.0 ? (15.2 cm x 4.3 cm x 1.91 cm)
• Read Range: up to 5.5 ? (14.0 cm)
Features
Accepts 5 to 16volts, meeting most voltage requirements.
Available with Wieg and/or Clock-and-data interface.
Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
Mounts directly onto metal with no change in read range performance.
Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
Specifications
Typical maximum* read range
ProxCard® II card – up to 5.5” (14 cm)
ISOProx® II card – up to 5” (12.5 cm)
DuoProx® II card – up to 5” (12.5 cm)
ProxKeyTM II keyfob – up to 2” (5 cm)
ProxCard PlusTM card – up to 2” (5 cm)
Smart ISO/DuoProxTM cards – up to 5” (12.5 cm) Proximity & MIFARETM card – up to 5” (12.5 cm) *Depending on local installation conditions.
Dimensions:
6.0” x 1.7” x 1.0” (15.2 × 4.3 × 2.54 cm)
Material: Polycarbonate UL 94
Power supply:
Standard MiniProx: 5-16 VDC
Haz. Loc. MiniProx: 5-16 VDC
Linear power supplies are recommended.
Current requirements:
Average: 30 mA (5 VDC); 20 mA (12 VDC) Peak: 110 mA (5 VDC); 110 mA (12 VDC)
Operating temperature:
-22° to 150° F (-30° to 65° C)
Operating humidity:
0-95% relative humidity non-condensing
Weight:
With terminal strip 3.5 oz. (99 gm) With pigtail 3.8 oz. (108 gm)
Haz. Loc. MiniProx: 3.8 oz. (108 gm)
Transmit frequency: 125 kHz Excite frequency: 125 kHz
Cable distance:
Wiegand interface: 500 feet (150 m)
Clock-and-data interface: 50 feet (15 m) Recommended cable is ALPHA 1295 (22 AWG)
5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.
Export To PDF