DSC HS3251CP01 PowerSeries Neo Kit
Product Info
NEO CONTROL PANEL KIT. CONTAINS ONE HS2032NK CONTROL PANEL WITH CP01 SOFTWARE IN A PC5003C CABINET ONE HS2LCD FULL MESSAGE LCD HARDWIRED KEYPAD A BD7-12 12V 7AH BATTERY A PTD1640U STANDARD EFFICIENCY TRANSFORMER & A SD15WULF INDOOR SIREN.
What you get:
Alarm cabinet, HS2032 control board, 16.5V 40VA Transformer, 12V 7A Backup Battery, HS2LCDENG Keypad, SD15W 15 Watt Indoor Dual Tone Siren.
What you get:
Alarm cabinet?HS2032 control board?16.5V 40VA Transformer?12V 7A Backup Battery?HS2LCDENG Keypad?SD15W 15 Watt Indoor Dual Tone Siren?Purchase Optional Pre-programming for your system HERE
The DSC PowerSeries NEO is the newest in DSC’s line up. What you’ll get with the HS3251CP01 kit are the DSC NEO HS2032 control board and PC5003C cabinet. This also comes with the PTC1640 transformer and a 12 volt 7 amp backup battery. You’ll also get the HS2LCDENG Full message keypad, which will allow easier programming and the ability to label zones.
This is a hardwired/wireless hybrid system. It comes with 8 hardwired zones on the mainboard, and you can add more hardwired zones by installing the HSM2108 8-Hardwired Zone Expander Module. As we just mentioned, the DSC NEO can use wireless devices as well. The DSC NEO wireless devices can be used if you have a wired keypad with a built-in transceiver such as the HS2LCDRF9ENG or by using the HSM2HOST9 Transceiver Module. The wireless range that the NEO has is an impressive half-mile, and the device’s lithium batteries will last a good 6-8 years before having to be replaced because of the energy-saving features that the NEO has to offer. You’ll get a total of 32 zones with the HS2032 panel in any combination of hardwired and wireless devices.
The HS2032 board has 2 PGM outputs, which can be used for additional attached devices such as smoke detectors. The PGMs can also be used as triggers to set off additional notifiers like add-on chimes when certain system events occur. You can expand up to 38 PGMs using modules such as the HSM2204 and the HSM2208 PGM expander cards. The HSM2204 is a high-current output and power supply. It adds 4 PGM outputs. The HSM2208 is a standard 8 PGM output expansion board. Those with the 2 onboard PGM outputs bring the PGM output total to 38.
Because of the keypad you get with this kit, the HS2LCDENG; you’ll have a much better time programming your new NEO panel. This keypad will read out a
Export To PDF