DIGITAL SECURITY INTERNET ALARM COMMUNICATOR
Product Info
The Tyco DSC T-LINK TL250 Internet alarm communicators create fully supervised security solutions between protected premises and central monitoring stations. The simple-to-install modules save end-users money by taking advantage of their existing networks to provide secure Internet communications over a private network (LAN/WAN) or the Internet, between the control panel and the Sur-Gard System ll/III central station receivers. This method provides flexibility and an always-on, two-way line of communication.
Features
Compatible with PowerSeries (v3.24 and higher) and MAXSYS (v3.31 and higher) control panels
Works over local LAN/WAN network or the Internet
128-bit AES encryption (NIST approved)
Supports DHCP (dynamic IP addresses)
Low network bandwidth requirements
Compatible with 10/100BaseT networks
Reports events to 2 different receiver IP addresses
Polling and hardware substitution protection
Instant, always-on IP communication
Software upgrades via network
4 on-board programmable inputs and 2 programmable voltage outputs as stand-alone module
Programmable through the system keypad, PK5500 LCD keypad or T-Link Console software
Download control panel via Internet with DLS software
Compatible with Sur-Gard System I/II/III/IV monitoring station receivers
UL standard & encrypted line security
ULC passive or active line security levels A1-A4
Specifications
Dimensions: 3.25 × 5.25 (83 mm x 133 mm)
Input Voltage: 12 VDC
Current Draw: 250 mA, (275 mA with PGM or PC5108)
Operating Environment: 32 to 120 F (0 to 49 C)
Relative Humidity: 5% to 93%
Export To PDF