ELK PRODUCTS SUPERVISED WIRELESS WATER SENSOR
Product Info
The ELK-319WA is a Supervised, Wireless Water Sensor designed so that the transmitter mounts on a wall or other flat vertical surface, and the remote probe is placed in the location where water leakage is most likely to occur.
Moisture forming a bridge between the two metallic contacts on a remote probe is all that is needed for the unit to signal an alarm condition. The output on the ELK-319WA will remain in alarm state until the moisture bridge is broken. As sensitive as the water sensor is, it will not alarm due to high humidity or condensation. The ELK-319WA is ideal for use in homes, offices, computer rooms, warehouses, etc.
Features
Water detection when liquid makes contact with the probe
Contacts above floor level to prevent false floor condensation detection
Checks for water constantly, requires two positive checks for a valid alarm
Compatible with ELK’s E27 Alarm Engine and M1 Controls, as well as other system utilizing the 319.5 MHz frequency
Specifications
RF frequency: 319.5 MHz
Battery type: Two (2) CR2032 3VDC lithium coin-cell
Code Outputs: Tamper, Tamper Restore, Alarm,
Alarm Restore, Low Battery
Operating Temp Range: 32 to 120°F (0 to 49°C)
Dimensions Transmitter: 2.71” H x .95” W x .56” D
Probe: .7” W x 1.77” L x .38” D
Cable Length 72”
Export To PDF