SINGLE DOOR ACCESS MODULE
Product Info
SINGLE DOOR ACCESS MODULE
A single door access interface module for use on the M1 and M1EZ8 Control Panels. The M1KAM connects to the 4 wire keypad data bus in place of a traditional M1 Keypad. Since the maximum number of keypads on an M1 or M1EZ8 is 16, the maximum number of M1KAM modules (and controlled doors) is 16, minus any installed keypads. Even though an M1 Keypad can accept a 26 bit access reader, the M1KAM is a more powerful and less expensive access solution. For example; the M1KAM includes a relay (door unlock) output with form “C” dry contacts, making it compatible with most door lock devices regardless of the voltage rating and style (AC or DC).
Features:
Input for a 26 bit Wiegand Reader, such as ELK-106055
Heavy Duty Form “C” Relay Contacts for Switching Door Strike Power
Low Current (50mA) Switched Negative (pull to ground) Output for “Door Held Open” Alarm
Low Current (10mA) Switched Negative (pull to ground) Output for “System Ready To Arm” indication
Low Current (10mA) Switched Negative (pull to ground) Output for “System Armed” indication
Supervised Input for RTE (Request To Exit) Button/Device
Supervised Input for Door Status Sensor
Installs in place of an M1 Keypad and operates from the RS-485 4-Wire Keypad Data Bus
Four selectable Time settings for “Request to Exit” and “Door Held Open”
Hardware Watchdog Circuit
Specifications:
Connections: Unpluggable Screw Terminals, 16 Position
Operating Voltage: 13.8 VDC
Current Draw: Less than 30 mA with min. activity, 44 mA fully active
Housing Dimensions: 4.25” x 6.375” x 2.125”
Circuit Board Dimensions: 3.95” x 2.875” x .95”
Maximum number of access modules and keypads per system: 16
What’s Included:
ELK-M1KAM Single Door Access Module
Hardware pack containing 4 screws, 2 resistors, and a diode
Plastic Housing
Instructions
Export To PDF