IC INTRACOM Power over Ethernet (PoE) Injector
Product Info
POWER OVER ETHERNET (POE) INJECTOR10/100 802.3AF SINGLE PORT 15.4WATT INJECTOR
1 Port, 48 V DC, IEEE 802.3af Compliant
Features:
Ideal when AC power is not available
Distance support: up to 100 m (328 ft.)
Power output of up to 15.4 Watts
Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
Full-power Class 3 PoE design
Fanless design ideal for silent operation
Fully NDAA-compliant
Three-Year Warranty
Specifications:
Standards
IEEE 802.3af (Power over Ethernet)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)
General
Media support:
- 100Base-TX Cat5 UTP/STP RJ45, 8 pin
Ports:
- 1 RJ45 100 Mbps input port
- 1 RJ45 100 Mbps data and power output ports
- 1 power input connector (3 pin)
Protection functions:
- Short-circuit protection for short GND
- Overload protection for currents over 450 mA
- High-voltage protection for output voltage exceeding 52 V
Compatibility – general: all IEEE 802.3af-compliant PoE devices
Supported INTELLINET NETWORK SOLUTIONS products:
- Wireless 300N Access Points (524735, 524711)
- High Power Wireless G Access Point (503082)
- PoE Splitter (502900)
- Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
Certifications: FCC Class B, Part 15, CE 89/336/EEC, UKCA, NDAA
RJ45 Input Connector Pinout
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: NC (not connected)
Pin 5: NC (not connected)
Pin 6: Tx- (data transmit)
Pin 7: NC (not connected)
Pin 8: NC (not connected)
RJ45 Output Connector Pinout (Data + Power)
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: -Vdc_return () (feeding power [])
Pin 5: -Vdc_return () (feeding power [])
Pin 6: Tx- (data transmit)
Pin 7: Vdc (feeding power [])
Pin 8: Vdc (feeding power [])
LEDs
AC Powered (red)
Channel Powered (green)
Channel Alarm (red)
Power
Input: 100 – 240