IC INTRACOM 8-PORT GIGABIT ETHERNET POE PLUS
Product Info
8-PORT GIGABIT ETHERNET POE PLUS WEB-MANAGED SWITCH WITH 2 SFP PORTS 140W POWERED DEVICE MONITOR INSTALLED
Save installation time and money with PoE
The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Web-Managed Switch is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Gigabit Ethernet ports (all of which support 802.3at/af PoE/PoE+), this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 1000 Mbps.
Power over Ethernet 802.3at
The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Web-Managed Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port.* IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places like ceilings and walls. Any mix of PoE and non-P
Features
Provides power and data connection for up to eight PoE network devices
Save time and money by delivering data and power via existing network cables
Self-Healing Network – the Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic
Domotz compatible for cloud management (may require firmware upgrade)
For use on desktop or mounted in standard 19” rack
10/100/1000 auto-sensing ports automatically detect optimal network speeds
Two small form-factor pluggable GBIC module slots (SFP)
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
Power output up to 30 watts per port*
PoE power budget of 140 watts
PoE surge protection (4 kV) for all RJ45 ports
20 Gbps switch fabric
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.)
Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
IEEE 802.3az (Energy Efficient Ethernet EEE) can be deactivated
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
All RJ45 ports with Auto-MDIX (auto uplink) support
Configuration via Web browser, Telnet or SSH
Remote Reboot/restart
Supports SNMP management
PoE Management – PoE port settings, priority and power-on delay
IGMP Snooping for multicast filtering
SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9
Supports VLAN (tag-based and port-based)
Supports link aggregation (trunking)
Supports port mirroring
QoS (Quality of Service) bandwidth management
Broadcast storm control with multicast packet rate settings
Store and forward switching architecture
Supports jumbo frames up to 9 kBytes
Supports Rapid Spanning Tree/Spanning Tree protocol
IEEE 802.3x flow control for full duplex
Supports 8k MAC address entries
512 kBytes buffer memory
High-efficiency fan delivers quiet, reliable cooling
Desktop-
Export To PDF