IC INTRACOM 24-Port Gigabit Ethernet PoE+ Switch wit
Product Info
24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports Self-Healing
Power over Ethernet Switch with 26 ports – 24 RJ45 and Two SFP, High-Power PoE+, PD Alive, VLAN and PoE Extend Mode
The Intellinet Network Solutions 24-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1,000 Mbps.
Power over Ethernet 802.3at
This high-powered switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch need no additional power to help avoid the time and expense of electrical rewiring and minimize the unsightly clutter of power supplies and adapters on ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage
Features
Provides up to 24 PoE network devices with power and data
Two 1G small form-factor pluggable (SFP) module slots
PoE power budget of 370 watts
Self-Healing Network – the Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic
Power output up to 30 watts per port
Manual VLAN mode to isolate ports 1 to 24 from each other while allowing them to communicate with SFP uplink ports 25 and 26
Manual PoE extend mode (reduces network speed and extends PoE support to 250 m/820 ft.)
PoE extend mode, ideal for IP camera installations
52 Gbps switch fabric
10/100/1000 auto-sensing ports that automatically detect optimal network speeds
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
Green Ethernet power-saving technology that deactivates unused ports and adjusts power levels based on the cable length
Saves installation costs by delivering data and power over existing network cables
Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
Supports jumbo frames up to 9216 Bytes
Store and forward switching architecture
Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode
Supports 8k MAC address entries with Auto-learning and Auto-aging
Buffer memory of 4.1 Mbits
Grounding point to protect equipment from external electrical surges
ESD protection up to 8 kV (air) and 6 kV (contact)
Two high-volume cooling fans to ensure perfect ventilation
Includes 19” rackmount brackets
Fully NDAA-compliant
Three-year warranty
Export To PDF