KERI SYSTEMS INC. 4 DOOR NXT CONTROLLER W/MERCURY-POWERED
Product Info
4 DOOR NXT CONTROLLER WITH MERCURY-POWERED OPTION
Keri Systems has partnered with Mercury Security to bring enhanced capabilities to its doors.NET customers that use the NXT hardware platform of TCP/IP-based controllers. By embedding Mercury Firmware in NXT Controllers a whole new set of features become available for applications with more sophisticated and customized requirements. This broadens the scope of NXT hardware capability such that it makes it a good choice for high-end and Enterprise applications as well as mid-sized projects that demand high end features.
The NXT-MSC controller has all of the hardware advantages the Standard NXT controller has. By using an existing TCP/IP network, controller cabling costs can be eliminated. Or, if building a new network, they can be reduced up to 50% over traditional hard-wired access systems by using inexpensive, CAT-5 cable. The NXT-MSC 2D/4D is designed to be extremely intelligent with little reliance on network traffic for decision making, allowing it to be thrifty with any network’s valuable bandwidth. With Ethernet functionality built directly into the controller, Keri’s proprietary MAC addressing scheme allows for reliable hardware discovery and true one-button auto-configuration.
Features:
4 Door/8 Reader Controller for Keri’s Doors NXT product line
On-board TCP/IP – no network adapters required
Reduces controller cabling cost up to 50% over RS-485, Current Loop or other traditional networking schemes by allowing unshielded CAT5 cable
Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5 Network
Embedded MAC Address for One button AutoConfiguration
Built-In Tamper Input
Standard 4 PIN Block and RJ Jack built-in for network connection
Re-assignable Inputs and Outputs
Flash Memory for easy firmware upgrades
Up to 64 Controllers (256 doors) and 1024 auxiliary I/O points per controller network
50,000 Cardholders, 10,000 Selectable Event Buffer per controller
Locking Metal Enclosure (optional without)
96 Bit Encryption
Specifications:
Dimensions: Enclosure 13.125” H x 10.625” W x 3.06” D (33.34 cm x 26.99 cm x 7.77 cm)
Dimensions: PC Board 5.6” H x 6.6” W x 2.55” D (14.28 cm x 16.83 cm x 2.55 cm)
Weight (In Enclosure): 5.00 Lbs (2.27 Kgs)
Input Voltage: + 12 VDC nom. (10 – 14 VDC)
Current Draw: 650 mA typical
Inputs: (8, reassignable) Door Contact Switch (4), Request to Exit (4), Expandable up to 24 Inputs
Outputs (4, reassignable): 1.0 amp (24 VDC max.) dry circuit, Expandable up to 20 Outputs
Reader Capacity: 8 with NXT Readers, 4 with Wiegand or MS Readers
Buffer Capacity: 50000 Cardholders, 10000 Events