KERI SYSTEMS 4 DOOR XTREME CONTROLLER (NO ENCLOSURE)
Product Info
The NXT-2/4D Controller is built for today’s IT environments. By using an existing TCP/IP network, controller cabling costs can be eliminated. Or, if building a new network, they can be reduced up to 50% over traditional hard-wired access systems by using inexpensive, shielded CAT-5 cable. The NXT-2/4D is designed to be extremely intelligent with little reliance on network traffic for decision-making, allowing it to be thrifty with any network’s valuable bandwidth. With Ethernet functionality built directly into the controller. Keri’s proprietary MAC addressing scheme allows for reliable hardware discovery and true one-button auto-configuration.
Features
4 Door/8 Reader Controller for Keri’s NXT product line
On-board TCP/IP connectivity – no network adapters required
Manages 4 doors with In/Out capability when using NXT Readers
Utilize existing LAN/WAN/Ethernet or pull your own dedicated CAT-5/6 Network
Embedded MAC Address for one button Auto-Configuration
Standard 4 Pin Block and RJ-45 Jack built-in for network connection
Re-assignable Inputs and Outputs
Quick Disconnect Connector
Specifications
Size (Enclosure) – 13.125” H x 10.625” W x 3.06” D(33.34 cm x 26.99 cm x 7.77 cm)
Size (PC Board) – 5.6” H x 6.6” W x 2.55” D(14.28 cm x 16.83 cm x 2.55 cm)
Weight (In Enclosure) – 5 lbs (2.27 Kgs)
Input Voltage – + 12 VDC nom. (10 – 14 VDC)
Current Draw – 650 mA typical
Inputs (8, reassignable) – Door Contact Switch (4), Request to Exit (4), Expandable up to 24 Inputs
Outputs (4, reassignable) – 1.0 amp (24 VDC max.) dry circuit Expandable up to 20 Outputs
Reader Capacity – 8 with NXT Readers *4 with Wiegand or MS Readers
Buffer Capacity – 48,000 Card holders10,000 Events
Temperature / Humidity – -40° F to 140° F(-40° C to 60° C)0-90% Non Condensing
Communication – To Server : TCP/IP 10/100 bus, Between Controllers : TCP/IP 10/100 bus
Lithium Battery – 5 years Memory Retention
Export To PDF