DORMAKABA USA INC COMMUNICATION INTERLINK MODULE
Product Info
The CIM is a communication control module designed to use a CAN Bus communication network. Keyscan’s CIM provides optimized server to access control unit (ACU) communication. The Communication Interlink Module creates a new inter-panel ACU to ACU communication network that provides global communication functions including anti-passback, global input/output and global time zones. The CIM includes an impressive host of new features including ground loop protection, enhanced diagnostics, improved speed and unprecedented reliability.
Features:
Can be used to establish a communication network among multiple Access Control Units
Uses Controller Area Network (CAN) Bus infrastructure to provide optimized server to Access Control Unit communication and ACU to ACU inter-panel communicaiton without Server dependence
Comes with ribbon cable
Requires REV 11, PC101X or PC109 ACU Boards with a minimum of V7.40 / 8.20 Firmware
One module is required for each access control unit
Optional NETCOM 2P / 6P can be mounted directly on the board
Standardized Cabling: Connects CAN Bus utilizing CAT5 cabling.
Ground Loop Tolerance: Maximizes earth ground electrical separation, preventing ground loops.
Fault Tolerance: One CIM won’t bring down the loop. CAN Bus protocol ensures continuous network connectivity.
Communication Speeds: 115K BPS communication speeds.
Enhanced Diagnostics: Provides troubleshooting diagnostics.
Auto Bit Rate Configuration: Automatically matches bit rate to control unit settings.
Network Adaptation: Supports Keyscan’s TCP/IP plug-in NETCOM2P/6P. (pictured above)
Ribbon Cable: Fast installation via ribbon cable to control unit.
Global Communication: Direct CAN Bus connection enables ACU-to-ACU communication without a server. This enables new features and functions.
Provides optimized server to access control unit (ACU) communication
Gives users an all new ACU to ACU network providing inter-panel communication for global functions
The CIM also includes enhanced device-based diagnostics and improved communication speeds.
Specifications:
Product Type: Control Communication Module
Country of Origin: Canada
Additional Information: Country of origin: Canada. Country of origin is subject to change.
Device Supported: Access Control System, Communication System
Height: 3”
Height (mm): 76.2
Width: 4.6”
Width (mm): 117.475
Export To PDF