LIFESAFETY POWER INC DCLASS UNIFIED POWER SYSTEM
Product Info
DMP Unified Power Systems combine FlexPower® power modules alongside DMP 734/734N Wiegand Interface Modules in one compact and secure UL Listed solution.
This unit is a 75W 12V or 24V DC single voltage access power system.
The C4 lock control module provides four access control inputs capable of voltage or dry contact activation and four fused outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO.
DMP access enclosures are painted steel with one removable DMP module backplate and include lock, two (2) keys and tamper switch.
Features:
20 or 230 VAC input
12 and 24 VDC outputs
On board Fire Alarm Interface
Continuous and resettable DC
Four lock control – fused at 3A each
Increased power, multiple voltages
Additional distribution outputs
Network monitoring and reporting
Specifications:
Input Power
Input 120/230 VAC 50/60 Hz | 83 Watts (.70 Amps)
Overload and short circuit protection
Over temperature protection
Polarized AC power supply disconnect
Output Power
FPO75: 12V/6A or 24V/3A | 75 Watts
Outputs: Continuous (DC1) Resettable (DC2)
4 lock outputs, fused
120 mV output voltage ripple
System Efficiency: 83% | System BTU Rating: 33 BTU/Hr
Battery Charging
Independent built-in 1A charger for sealed lead acid or gel type batteries
Microprocessor dual rate charging of 12 or 24 V battery sets
Charges up to 40Ah battery sets within UL limit
Automatic switchover to standby battery when AC fails
Zero voltage drop when switched over to battery backup
Supervision
AC Fail (form “C” contacts)
System Fault (form “C” contacts) may be triggered by low/no battery, short to earth ground, power supply failure
Visual Indicators
AC input, DC1 and DC2 output
System fault | AC fault | Short to earth ground | Reverse battery polarity
Fire Alarm Input activated
C4: DC output and fault
Regulatory Compliance
UL294, UL603, UL1076, ULC S318, ULC S319
CSA C22.2 #107.1, CSA 22.2 #60950
CSFM / FCC Part 15, Subpart B, CE
Enclosure Dimensions
Size: 14.00H x 12.00W x 4.50D in. (35.00 × 31.00 × 11.50 cm)
Weight: 14 lbs.
Access Panel Mounting
Pre-installed bracket mounts two (2) DMP modules
Export To PDF