8 TO 255 ZONE HYBRID CONTROL
Product Info
8 TO 255 ZONE HYBRID CONTROL
NAPCO’s Gemini GEM-X255 is a state-of-the-art microcomputer-based burglary and residential fire alarm control panel of modular design. Integrally an 8-zone panel, it will support up to 255 zones with optional zone expansion modules, wireless receiver modules and/or GEM-RP1CAe2/GEM-K1CA Keypads. Each panel includes an integral digital communicator. The control panel features programmable area partitioning. That is, the system may be divided into up to 8 discrete multiple-zone areas, each allowing access by only those users programmed for their respective area(s).
Features:
8 to 255 hardwired zones or wireless pts/zones
Expandable using 8-zone GEM-EZM8 expansion modules
Up to 96 fire zones, with 8 2-wire fire zones
Up/downloadable using PCD-WINDOWS.
Up to 8 areas
Up to 195 user codes with open/close by user
Fuseless, maintenance-free operation
3 on-board relay output & 1 prog. lug
Up to 96 relays
Supports 4 wireless receivers
Supports 15 GEMRP1CAE2 or K1CA keypads
Up to 2 interior bypass groups
X-10 support, for 64 devices (with GEM-X10 module)
800 event log with open/close suppress
Auto arm/disarm
255 event scheduler
All major communication formats & secondary pager format
Telco line cut supervision.
Specifications:
Operating temperature: 0-49C (32-120F)
Input power: 16.5Vac via Class 2 Plug-In 40VA Transformer, supplied
Loop voltage: 10-13VAC
Loop current: 2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke-detector zones
Loop resistance: 300W max.; 50W for 2-wire smoke detector zones
Relay outputs (burglary; reset; aux): wet, 12Vdc, 1.2A max.; dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A
Auxiliary power output: 12 Vdc regulated
Remote power output: 12Vdc regulated (for keypads) 750 mA combined Standby Current (Remote Power Aux. Power Reset Relay Power)
Standby time: Residential fire/burglary & commercial burglary, 4 hours minimum
EZM Module: GEM-EZM8: input, 50mA (including PGM Output) PGM output: 5mA, 12V special application
Keypad current: GEM-RP1CAe2, GEM K1CA: 100mA; 35mA if back lighting is disabled (cut W1, W2 & W3) PGM output: 5mA, 12V special application
Maximum number of keypads: 15 maximum wiring length for each run (#22AWG): 1000 divided by total number of keypads & EZMs on run
Keypad Dimensions: 4 3/8 × 5 7/8 × 1 1/6 (HWD); 11.1cm x 14.9cm x 2.7cm (HWD)