BOARD ONLY FOR GEMP3200
Product Info
Napco GEMP3200EXPCBD Control Panel Expansion Circuit Board
Specifications:
Operating temperature: 0-49C (32-120F)
Input power: 16.5Vac via Class 2 Plug-In 40VA transformer
Loop voltage: 10-13Vdc
Loop current:2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke-detector zones
Loop resistance: 300W max.; 50W for 2-wire smoke detector zones
Relay outputs (burglary; reset; aux): wet, 12Vdc, 1.2A max.; dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A, 0:6 PF
Auxiliary power output: 12Vdc regulated
Remote power output: 12Vdc regulated (for keypads)
650 mA combined standby current (remote power aux. power reset relay power)
Standby time: residential fire/burglary & commercial burglary, 4 hours min.
EZM module: GEM-EZM8: Input, 50mA (including PGM output. PGM output: 5mA, 12V special application
Keypad current: GEM-RP1CAe2: 100mA; 35mA if backlighting is disabled (cut W1, W2 & W3) PGM Output: 5mA, 12V special application
Maximum number of keypads: 7. Maximum wiring length for each run (#22AWG): 1000 feet divided by total number of keypads & EZMs on run
Designer keypad dimensions: 4 3/8 × 5 7/8 × 1 1/6in (HWD); 11.1cm x 14.9cm x 2.7cm (HWD)