PAXTON ACCESS INC P10 DOOR CONTROLLER-POE
Product Info
P10 DOOR CONTROLLER – POE
Paxton10 Door Controllers are the building blocks of the Paxton10 system. Each one provides control of a single door and a port to allow support for up to three Paxton10 connectors for additional functionality. A single Paxton10 system can include up to 1000 door controllers.
The Paxton10 door controller is a network device that communicates over TCP/IP and can be integrated into an existing network infrastructure.
PoE+ – The Paxton10 PoE+ Door Controller is equipped with a built-in PoE+ splitter, with which it is possible to supply the door controller and door lock via PoE+, so no 230v connection is required at the door. We recommend using a TCP/IP network switch with PoE+ output. It is also possible to place a backup battery in the Paxton10 PoE+ Door Controller, if you want an extra backup in case of power failure, we recommend placing the switch behind a UPS.
The door controller is equipped with 4 inputs, tamper, 230v fail, door contact and RTE.
An intruder alarm can be integrated using the Paxton10 alarm connector
Mains powered and PCB only (with or without plastic enclosure) options also available.
Features:
Controls a single door and provides additional I/O for general use
Distributed intelligence architecture, no central point of failure
Connector port to cascade up to three Paxton10 connectors
Two reader inputs for read in/read out control
PoE powered with 12V lead acid battery back up
Specifications:
Application/Usage: Door
Number of Doors: 2
Serial: Yes
Network (RJ-45): Yes
Identification Method: Key Code, Proximity
Product Line: Paxton10
Ethernet Technology: Ethernet
Form Factor: Wall Mountable
Product Type: Door Access Control Panel
Depth (mm): 75.692
Height (mm): 323.088
Width (mm): 323.088
Width: 12.7”
Height: 12.7”
Depth: 3”
Input Voltage: 24 V DC
Environmentally Friendly: Yes
Limited Warranty: 5 Year
Environmental Certification: WEEE