CEILING SELECTABLE STROBE RED
Product Info
The CS/CHS Series Colored Lens Signals are 24VDC units available in lens colors of amber, blue, green, and red. The Series offers tamperproof field selectable options of 15, 30, 60, 75, and 110 candela. They have a minimal operating current and a minimum flash rate of 1Hz, regardless of input voltage. The strobes can be synced using a Gentex sync protocol or the AVSM Sync Module.?The Colored Lens Series is shipped with a die-cast universal 4 mounting bracket which incorporates the popular Super-Slide feature that allows the installer to easily pre-wire the system and test for supervision. The product also features a locking mechanism that secures the signal to the bracket without showing any screws. The Colored Lens Series also features the Checkmate – Instant Voltage Verification Feature which allows the installer to check the voltage drop, current draw, and match against the blue print.
Features:
Nominal voltage 24 VDC
Tamperproof field selectable candela options 15, 30, 75, 95, 115, & 150
Super-Slide® Bracket – Ease of Supervision Testing
Checkmate® – Instant Voltage Verification
Synchronize strobe and/or horn with Gentex AVSM Control Module
Prewire entire system, install mounting bracket, then install signals
Documented lower installation and operating costs
Input Terminals 12 to 18 AWG
Switch Selection for High or Low dBA
Switch Selection for 2400Hz or mechanical Tone
Switch Selection for Continuous or Temporal 3
Tamperproof re-entrant grill
Surface mount with the CLNGBB (Ceiling Surface Mount Back Box)
Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
Faceplate available in red or off-white
Operating Temperature: 32°F to 120°F (0°C to 49°C). The CS Series is not listed for outdoor use.
Unit Dimensions 6” (15.24 cm) x 2.6” (6.604 cm)
Export To PDF