WALL SELECTABLE STROBE RED
Product Info
The S-24/HS-24 Series is a low profile strobe and horn/ strobe combination that offers dependable audible and visual alarms and the absolute lowest current available. The S-24 & HS-24 Series 24VDC offers tamperproof field selectable candela options of 15, 30, 60, 75, and 110 candela. The Strobe and Horn/Strobe offers a continuous or sync temporal three in 2400Hz and mechanical tone, a chime and whoop tone. All tones are easy for the professional to change in the field by the use of switches. The S-24 & HS-24 Series has a minimal operating current and has a minimum flash rate of 1Hz regardless of input voltage.
Features:
24VDC units have field selectable candela options of 15, 30, 60, 75, & 110
Super-Slide® Bracket – Ease of Supervision Testing
Checkmate® – Instant Voltage Verification
Synchronize strobe and/or horn with AVSM Control Module
Prewire entire system, install mounting bracket, then install signals
Documented lower installation and operating costs
Input terminals accept 12 to 18 AWG
Switch selection for high or low dBA
Switch for chime, whoop, mechanical and 2400Hz tone
Tamperproof re-entrant style grill
Switch for continuous or temporal 3 tone (not available on whoop tone)
Surface mount with the AVBB (Surface Mount Back Box)
Silence audible while visual appliance will remain flashing (for use in accepted jurisdictions)
Faceplate available in red or off-white
Operating Temperature
32°F to 120°F (0°C to 49°C). The HS and S Series are not listed for outdoor use.
Unit Dimensions
5” (12.7 cm) high x 4.5” (11.43 cm) wide x 2.5” (6.35 cm) deep
Export To PDF