ALULA BAT-FIRE CATM1 VERIZON
Product Info
The Alula BAT-FIRE-VZ is a universal dual-path internet/cellular Verizon 5G LTE-M commercial fire alarm communicator. The BAT-FIRE-VZ communicator connects to an intrusion or fire alarm control panel (FACP) and provides central station alarm reporting. The BAT-FIRE-VZ can be configured to provide dual-path connectivity using Ethernet/broadband and cell or single-path connectivity using either Ethernet/broadband or cell to Bosch Conettix D6100IPv6 receivers at the central station. The BAT-FIRE-VZ allows system integrators to save money, maximize install flexibility and skip the 4G cellular sunset.
The BAT-FIRE-VZ provides inputs that can be used to monitor an FACP’s alarm, AC fail, and trouble points (dry contact outputs). In this topology BAT-Fire inputs will be connected to the FACP points (dry contact outputs). The communicator will continually monitor the state of the FACP points (dry contact outputs). A state change on a BAT-FIRE-VZ monitored FACP point (dry contact output) will be reported to the central station.
Features:
Supports 12V and 24V regulated FACPs/burg panels
Alarm capture via phone line interface or standard FACP/burg panel points
Supports Contact ID (CID) reporting format
Dual Path: Ethernet (primary) with Cellular Verizon 5G LTE-M (backup)
Sole Path: Ethernet or Cellular Verizon 5G LTE-M
Platform visibility through AlulaConnect™
Trouble event detection and reporting
Four programmable input/output ports
At-a-glance system status via front-panel LEDs
UL 864 10th edition commercial fire certification
ULC-S559 commercial fire certification
UL 1610 commercial burg certification
ULC-S304 commercial burg certification (Security Level II installations)
Remote programming, troubleshooting and managed over-the-air firmware upgrades
5-year warranty
Please Note: The Alula BAT-FIRE-VZ fire alarm communicator requires a subscription to Alula monitoring services.
Specifications:
Housing Dimensions (H x W x D): 8.6” x 5.8” x 2.2” inches (21.8 × 14.6 × 5.5 cm)
Weight: 13.2 oz (372.9 g)
Cover Securing Screw: #6 screw (included)
Mounting Fasteners: #6 screws and wall anchors (included)
Pilot Hole for Screw into Wood: 1/8 in (3 mm)
Pilot Hole for Wall Anchor: 3/16 in (4.7 mm)
Antenna: External (Included)
Wire Gauge Range: 24-14 AWG
Operating Temperature: 32°F to 120°F (0°C to 48.9°C)
Maximum Humidity: 85% non-condensing relative humidity
Reported Indications: Cover Tamper
Current Draw: 154mA (Standby) 207mA (Max) @ 12VDC
109mA (Standby) 161mA (Max) @ 24VDC
Input Voltage: 10V-27VDC
Programmable Ouput Current Maximum: Will shunt up to 75 mA into ground
Central Station Receivers: Bosch Conettix: D6600 Plus, ITS-D6686-UL, D6100PV6
Cellular Network: Verizon 5G LTE-M
Certification Listings: FCC, IC, Verizon, UL 864 10th edition, ULC-S559, UL 1610, ULC-S304
Export To PDF