ALULA HARDWIRE TO WIRELESS TRANSLATO
Product Info
The Alula RE508X is a universal hardwired-to-wireless translation device for supporting multiple sensor-panel combinations. In addition to being a translator, you may choose to use the RE508X as a wireless repeater to extend the range of installations from the control panel. The RE508X translator/repeater is compatible with the DSC, Honeywell, Interlogix and 2GIG control panels and new/existing hardwired equipment. With the RE508X universal translator, you can add your existing hardwired security sensors using the 8 hardwired loops with end-of-line resistors. The device is UL compliant and it comes with the power supply and back-up battery included.
Features:
Compatible with any hardwired sensors going to the various wireless panels
8 Hardwire loops with end-of-line resistor detection
Unique wireless ID (or loop) for each zone
Unique wireless ID for the device itself
Transmit diversity for a long reliable range
PIR powering (via external supply)
External 12VDC power supply (Included)
Device low battery detect
Device tamper detect
Selectable wireless panel compatibility
Rechargeable backup battery
Automatic zone polarity and end of line detection
Battery backed 12VDC output for powered zones
Cover tamper
Compatible with 2GIG, DSC, GE Interlogix and Qolsys
Certified to UL1023, ULC1023, UL1610, and ULC S304
Specifications:
Dimensions: 8.5 × 5.0 × 1.3 inches
Weight with Battery: 16.0 Ounces
Tamper Activation: Cover Opening, Wall Removal
Mounting Screws: #4 or #6 (not included)
Operating Temperature: 32 to 120°F (0 to 49°C)
Storage Temperature: -4 to 86°F (-20 to 30°C), Long-Term
Maximum Humidity: 85% non-condensing relative humidity
12VDC Output: 10.2VDC to 13VDC, 150mA Max (80mA Max for UL installations)
Power Transformer Input: 100-240VAC 50/60Hz 0.5A
Power Transformer Output: 12VDC 1A
Power Transformer Part Number: RE012-6
Battery Specifications: 6VDC 800mAh NiMH
Battery Part Number: RE030
Trickle Charge: 8mA
Fast Charge: 32mA
Wireless Radio RF Frequency: 319.5MHz, 345MHz, 433.92MHz
Wireless Radio Compatibility: Cryptix® (Connect+), Interlogix® (formerly GE®), Honeywell®, DSC®, 2GIG®, Qolsys®
Supported Type Powered Zones: 4-wire devices only
Supported Type Non-Powered Zones: NC (Normal closed) or NO (Normal open)
Backup Battery Powered Zones: 4 hours minimum at 80mA
Backup Battery Non-Powered Zones: 24 hours minimum
NC – No Tamper Detect (Zone End of Line Resistor): None (short)
NC – Tamper Detect (Zone End of Line Resistor): 750 ohm to 15k ohm
NO – No Tamper Detect (Zone End of Line Resistor): None (open)
NO – Tamper Detect (Zone End of Line Resistor): 750 ohm to 15k ohm
Zone Wire Length: 1000 feet max
Zone Wi
Export To PDF