ALULA CONNECT PLUS TILT SENSOR
Product Info
The Alula RE606M is a Alula Connect+ Panel wireless tilt sensor with a new high accuracy MEMS component. The RE606M tilt sensor monitors the lifting or tilting of anything that moves. It is typically used to secure hatches, overhead roll-up doors and even moveable assets.??The RE606M sends an alarm when tilted more than 45 degrees from the mounting position. If the sensor rotates further than 135 degrees, it is likely to remain in a non-alarm state. For best results, the sensor should rotate within 90 degrees to ensure an alarm state occurs
Features:
Triggers at approximately 45 degrees tilt
Monitors any lifting or tilting door, or equipment movement
Mount vertically in non-alarm position
Strong, reliable RF signal
10-15 year battery life on CR123A battery
Low Battery indication
Alarm for anything that tilts
Useful for hatches, roll-up doors and even moveable assets
Cover tamper
5 year warranty
Specifications:
Dimensions: 3.25 × 1.40 × 1.05 inches (8.3 × 3.6 × 2.7 cm)
Weight (with Battery): 1.90 ounces (54 grams)
Mounting Fastener: #4 or #6 screws (not provided)
Cover Securing Screw (optional, not provided): Pan Head, #1 x .25in, A/AB Thread Forming (sheet metal) screw, McMaster 90190A051
Operating Temperature: 0 to 120°F (0 to 49°C)
Maximum Humidity: 85% non-condensing relative humidity
Frequency: 433.92 MHz
Replacement Battery: One Panasonic® CR123A
Nominal Battery Life: 10 to 15 years
Battery Voltage: 3.0 VDC (Nominal), 2.2 VDC (Low)
Current Draw: 20 mA (Maximum), 0.6 uA (Quiescent)
Transmitted Indications: Cover Tamper, Low Battery, Supervision
Certification: FCC, IC
Export To PDF