STOPPER II PULL STATION COVER
Product Info
STI-1100 consists of a clear, tamperproof, super tough polycarbonate cover, frame and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).
Features:
Protective UV-stabilized polycarbonate cover
The STI-1100 deters false alarms
Label text – IN CASE OF FIRE – LIFT COVER / ACTIVATE FIRE ALARM
95 or 105 dB warning sounder
Flush mount
UL/cUL Listed
3 year guarantee, 1 yr on electronics
Please note: Due to the curvature of this STI-1100 model, the depth stated will vary
Vertical installation recommended
137 mm H x 127 mm W x 81 mm D
Specifications:
Model Number STI-1100
Cover is UV-stabilized.
Lifetime guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).
95 or 105 dB self-contained alarm. Complete with battery
STI-1100 is for flush mount pull stations (surface – see STI-1130)
UL Listed to U.S. and Canadian safety standards (for standard and custom labeling)
FM Approved
Typical working properties of polycarbonate are -40° to 250°F (-40° to 121°C)
Fits virtually all manual pull stations (see Technical Data Sheet for dimensions)
Note: End user must verify the alarm and battery function every six months and replace battery annually or as required.
Export To PDF