STOPPER II W/HORN & SPACER
Product Info
STI-1130 consists of a clear, tamperproof, super tough polycarbonate cover, frame, spacer and piezo horn that fits over most manual pull stations. When lifted to gain access to the actual alarm, a piercing 95 or 105 dB warning horn sounds. Immediate attention is drawn to the area and a prankster will either run or be caught. The cover is connected to the frame by a cable. When the cover is lifted, it hangs off of the frame and the horn will sound until the cover is snapped back onto the frame (or for the life of the battery).
Features:
Protective UV-stabilized polycarbonate cover
The STI-1130 deters false alarms
Label text – IN CASE OF FIRE – LIFT COVER / ACTIVATE FIRE ALARM
95 or 105 dB warning sounder
Surface mount – 50mm clear spacer
UL/cUL Listed
3 year guarantee, 1 yr on electronics
Please note: Due to the curvature of this model, the depth stated will vary
Vertical installation recommended
137 mm H x 127 mm W x 131 mm D
Specifications:
Model Number STI-1130
Cover is UV-stabilized.
Lifetime guarantee against breakage of polycarbonate in normal use (one year on electro mechanical and electronic components).
95 or 105 dB self-contained alarm. Complete with battery.
STI-1130 is for surface mount pull stations (flush – see STI-1100).
UL Listed to U.S. and Canadian safety standards (for standard and custom labeling).
FM Approved.
Typical working properties of polycarbonate are -40° to 250°F (-40° to 121°C).
Fits virtually all manual pull stations (see Technical Data Sheet for dimensions).
Note: End user must verify the alarm and battery function every six months and replace battery annually or as required.
Export To PDF