HDMI OVER SINGLE CAT5E/6. EXTENDS RANGE
Product Info
HDMI OVER SINGLE CAT5E/6. EXTENDS RANGE UP TO 164FT (50M) OVER CAT6. CONNECT HDMI EQUIPMENT USING LOW-COST CAT5E/6 UTP CABLES. HDMI OVER CAT5E/6 WITHOUT ANY SIGNAL LOSS. SUPPORTS FULL 1080P RESOLUTION. SPECIAL FEATURES INCLUDE HDMI LOOP OUTPUT. INCLUDES T
Take HDMI audio/video signals further with the Seco-Larm Enforcer HDMI Extender over Single Cat5e/6. It uses only one Cat5e/6 cable (not included) to transmit clear HDMI audio/video signals up to 164 feet (50m) from source to display. It comes with both the transmitter and receiver, two power supplies, one IR transmitter, and one IR receiver. The Seco-Larm HDMI Extender over Single Cat5e/6 supports resolutions from 480i to 1080p with zero signal loss, has an HDMI Loop output for local HDMI display, includes an EDID Management switch, and features an IR Pass-through for remote control extension and operation. This means you can use the IR extender to increase remote control range for the HDMI component whose HDMI signal range you are extending.
Features:
Extends HDMI signals up to 164 feet (50m)
Supports resolutions from 480i to 1080p with zero signal loss
Transmits over a single Cat5e/6 cable
Includes IR extender to maintain remote control
Status LEDs indicate power and link status
Specifications:
Manufacturer Part #: MVE-AH1E1-01NQ
Input Video Signal: 3.3V
Input DDC Signal: 5Vp-p (TTL)
Maximum Single Link Range: 1080p
Deep Color: 24bit
Video Formats Supported: High-speed HDMI, HDCP 1.2
Audio Formats Supported: LPCM, Dolby-AC3, DTS7.1, DSD
Output Video: HDMI
Resolutions Supported: 1080p/1080i/720p/576p/576i/480p/480i
Range – 1080p: Up to 164 feet (50m)
Video Amplifier Bandwidth: 4.95Gbps
Video Input Connector: HDMI Type A 19-pin female
Maximum Input Cable Length: 24AWG (15m), 26AWG (10m), 28AWG (5m)
Video Output Connector: HDMI Type A 19-pin female
Maximum Output Cable Length: 24AWG (15m), 26AWG (10m), 28AWG (5m)
Cat5e/6 Wiring Standard: T-568B
IR Pass-Through Frequency: 30~60 kHz
Operating Voltage: 5VDC
Power Supply: 1A at 5VDC (2 Adapters) (2.1mm plug)
ESD Protection (human body model): ±8kV (Air-gap discharge), ±4kV (contact discharge)
Current Draw:
Transmitter: 300mA at 5VDC
Receiver: 200mA at 5VDC
Operating Temperature: 32’ to 104’ F (0’ to 40’ C)
Operating Humidity: 20 to 90% RH (No condensation)
Dimensions: 3-1/8 × 11/16 × 2-5/8 inches (79 × 17 × 67 mm)
Weight: 5.3 ounces (150g) Each
Credentials: FCC, CE RoHS
Warranty: 1 Year