4K HDMI OVER SINGLE CAT5E/6
Product Info
The ENFORCER 4K HDMI Extender over Single Cat5e/6 extends the range of traditional HDMI cabling methods by using an active transmitter and receiver to send video and audio over a single Cat5e/6. HDMI formats as large as 4K can be transmitted up to 197ft (60m) between the two units with zero signal loss by using integrated circuits in the receiver and transmitter.
Features:
Extends HDMI over a single Cat5e/6 cable
Supports resolutions from 480i to 4K with zero signal loss
Transmits 4K@60Hz up to 197’ (60m) or 1080p@60Hz up to 230’ (70m) over Cat6 cable
Plug and play operation
Active operation ensures signal strength
IR for remote control extension
One (1) 12VDC power supply included – set can be powered at either end
Specifications:
Maximum Single Link Range:
4K@60Hz
Deep Color:
8bit
Video Format Supported:
High-speed HDMI, HDCP 2.2
Audio Formats Supported:
LPCM 2/51/7.CH, Dolby Digital, DTS 5.1, Dolby Digital+, DolbyTrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
Output Video:
4K@60Hz
Resolutions Supported:
4K@60Hz/4K@30Hz/1080p/1080i/720p/576p/576i/480p/480i
Range:
1080p: Cat6: Up to 230’ (70m); Cat5e: Up to 164’ (50m)
Range – 4K:
Cat6@60Hz: Up to 197’ (60m); Cat5e@60Hz: Up to 164’ (50m)
Video Amplifier Bandwidth:
18Gbps
Video Input Connector:
HDMI Type A 19-pin female
Video Output Connector:
HDMI Type A 19-pin female
IR Frequency:
30 ~ 60 kHz
Power Supply:
1A@12VDC (1 Adapter) (2.1mm plug)
ESD Protection (Human Body Model):
±8kV (air-gap discharge), ±4kV (contact discharge)
Cat5e/6 Wiring Standard:
T-568B
Operating Temperature:
32°~104° F (0°~40° C)
Operating Humidity:
20~90% RH (no condensation)
Dimensions:
3-7/16“x23 / 8“x11/16” (88×61×17 mm)
Weight:
5.08-oz (144g) (each)