NO TOUCH RTE W/OVERRIDE BUTTON
Product Info
The ENFORCER Outdoor No Touch Request-To-Exit Sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since it is No Touch, this sensor is ideal for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
Features:
Single Gang
Weather-resistant (IP65) for outdoor use.
Clean and simple no-touch operation reduces the risk of cross-contamination.
Adjustable sensor range up to 7” (18cm).
Stainless-steel plate, available in slimline or single-gang.
1A relay, adjustable trigger duration 0.5~20 seconds.
Selectable LED colors (turns from red to green or green to red) to show if the sensor is activated.
Manual override button functions without electricity in case of power failure.
Specifications:
Operating Voltage: 12~24 VDC
Current Draw: Standby – 16mA@12VDC / 25mA@24VDC, Triggered – 20mA@12VDC / 32mA@24VDC
Relay Type: Form C dry contact, 1A@30VDC
Response Time: 10mS
LEDs: Standby – Red, Triggered – Green
Output Time: 0.5~20 s, toggle
Range: 2”~7” (5~18cm)
IP rating: IP65
Operating Temperature: -4~131 F (-20~55 C)
Weight: 125g
Dimensions: 4-1/2” x 2-3/4” x 1-1/2” (115×70×39mm)
Export To PDF