SECO-LARM INDOOR ILLUMINATED KEYAPAD W/PROX READER
Product Info
Built-in proximity card reader
12~24 VAC/VDC Auto-adjusting operation
Up to 1,000 possible user codes/cards for output 1, 100 for output 2, and 100 for output 3
Up to 50 possible visitor codes for one-time or limited-time use (1~99 hours)
Up to 50 duress codes for output 1, 10 for output 2, and 10 for output 3
Output 1: Form C relay, 1A@30VDC max. / output 2: Form C relay, 1A@30VDC max. / output 3: transistor ground, 100mA@24VDC
Outputs 1, 2, and 3 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Tamper output N.C. Dry contact, 50mA@24VDC max.
All features are programmed directly from the keypad; no need for an external programmer
EEPROM Memory protects programmed information in case of power loss
Duress code triggers a silent alarm if a user is forced to open the door under duress
Egress input lets users exit the premises without keying in the code
Keypad illuminates when a button is pressed, programmable for FULL or AUTO in standby
Mounts to a standard single-gang back box (surface-mount back box included)
Keypad active or alarm output selectable via jumper
Interlocking input for connecting to a second keypad
Door sensor input for anti-tailgating
Data I/O terminal for split-series setup providing added security
Expansion port for future optional features
Export To PDF