SIGNAMAX CAT6 MT-SERIES UNSCREENED KEYSTONE JACK
Product Info
CATEGORY 6 MT-SERIES UNSCREENED KEYSTONE JACK T568A/B BLACK
The Signamax Category 6 MT-Series Unscreened Keystone Jacks have been designed to meet the need for today’s high-bandwidth applications. These connectors are slim in profile for the highest density applications and have the ability to mount either color-coded icons for service identification or dust covers to protect unused jacks from dust and other contaminants.
The contact design provides enhanced plug-to-jack connection integrity, protects against damage caused by insertion of 4- or 6-position plugs. Special design features allow these jacks to be terminated with a standard 110 single-position Tool or with the Signamax four-pair Tool, and are rated for a minimum of 750 plug insertions providing for the highest level of system reliability.
Features:
Exceeds TIA-568-C.3 component performance specifications
Slim profile for the highest density applications
Improved wire retention and ease of termination with rear 110 type contacts
Meets IEC 60603-7, Supports IEEE 802.3af, 802.3at, and IEEE 802.3bt type 3 and 4 PoE applications
Compatible with Signamax screened snap-in patch panels and work area facePlates
Circuit identification icons, dust covers, and 110 protection caps included in kit
Available in convenient pack of 25 and master pack of 500 jacks
Specifications:
TRANSMISSION PERFORMANCE
ANSI/TIA-568-C.2: meets or exceeds Category 6 (1-250 MHz) component specifications
TRANSMISSION MEDIA
Unscreened twisted pair (U/UTP)
JACK TYPE
8p8c (8-position, 8-contact) “RJ45” style
WIRING SCHEME
ANSI/TIA-568-C.2: T568A & T568B
ISO/IEC 11801 2nd Ed.: 8-position pin/pair assignment (1-2/3-6/4-5/7-8)
WIRE GAUGE
22 to 24 AWG (0.644 to 0.511 mm)
ELECTRICAL
Insulation Resistance: Min 500 MOhm @ 100 Vdc
Dielectric Withstanding Voltage: 1,000 Vdc/ac peak contact-to-contact @ 60 Hz for 1 min
Spring Wire Contact Resistance: Max 20 mOhm
IDC Contact Resistance: Max 2.5 mOhm
Current Rating: Refer to downloadable spec sheet.
CONSTRUCTION
Housing: High impact thermoplastic, UL94V-0 Fire retardant
Jack Spring Wire: Phosphor bronze alloy plated with 50 µin of gold over 70 to 100 µin of nickel
IDC: 110 type, phosphor bronze alloy with 100 µin 100% tin alloy
MECHANICAL
Total Contact Force: Min 800 g for 8 wire leads
Retention: 50 N (11 lbf) for 60 ± 5 s
Mating Cycle Life: Min 750 cycles
FOOTPRINT
Standard keystone footprint
MOUNTING DIMENSIONS:
1.18” D x 0.67” W x 0.76” H (30.0 mm x 16.9 mm x 19.3 mm)
Environmental CONDITIONS
Operating Temperature: 14 °F to 140 °F (-10 °C to 60 °C)
Storage Temperature: -40 °F to 158 °F (-40 °C to 70 °C)
Operating RH: 93% Max (non-condensing)
COMPLIANCE
ANSI/TIA-568-C.2, IEEE 802.3 ab, IEEE 802.3 af/at/bt, IEC 60512-99-002, FCC Part 68 Subpart F, UL 94V-0
APPLICATIONS
X.21, V.11, S0, ISDN, CSMA/CD