SYSTEM SENSOR MULTI-SIGNALING ACCESSORY F/USE W/4-WIRE
Product Info
MULTI-SIGNALING ACCESSORY. FOR USE WITH 4-WIRE INNOVAIRFLEX DUCT DETECTORS.
The RTS2 is designed to work with InnovairFlex 4-wire conventional duct smoke detectors. The System Sensor RTS2 is an automatic fire detector accessory that tests remotely located duct detectors. They include a key switch that can be used to select one of two connected sensors to be tested, reset or both by a push-button switch.
Standby (Green Blink), Trouble (Amber), Maintenance (Amber Blink), and Alarm (Red) LEDs to indicate detector status
Keyswitch to select the desired sensor, enable test/reset button and sensitivity reading
Test/reset button
Selectable continuous or temporal tone
Provisions for single or double-gang box mounting
Dimensions: 4.8?W x 5.3?H x 1.6?D (12.2cm W x 11.9 cm H x 3.8 cm D)
Weight: 0.35 lb. (160 g)
Temperature: 14°F to 140°F (-10°C to 60°C)
Humidity: 95% relative humidity; non-condensing
Operating Voltage: 20-29 VDC
Connections: Strip terminal, 14 AWG to 22 AWG wire
Wiring Distance: 1000 Feet From Duct Smoke Detector
Sounder: 85 dBA at ten feet
Export To PDF