Browse Categories

WINLAND ELECTRONICS INC ALERT WATERBUG HARDWIRE VAC OR VDC

ALERT WATERBUG HARDWIRE VAC OR VDC
Item #: WD-WB200

Product Info

WDWB200
WINLAND ELECTRONICS INC
WB200

The WaterBug® 200 is a water detection device ideal for computer rooms, document storage areas, warehouses, sump pumps and basements. WaterBug sensors activate the alarm when a conductive bridge is formed between 2 contacts. Protect your assets with the WB200.

Features:
Console includes one standard unsupervised surface sensor (W-S-U)
Console accepts up to 6 total sensors (W-S-U)
Sensors can be located up to 100’ (30.48 m) away from the unit for wide area protection
Can be used to detect an absence of water
Hard wire powered console unit
Specifications:
Requires 12VDC power (power supply not included)
Current Draw: 12-24 VDC 35mA. 12-24 VAC 100mA
Sensitivity – Will not alarm due to high humidity or condensation.
Operating Temp 32 to 140F (0 to 60C)
Output: 1 Form C Relay (N.O./N.C.) rated 1 Amp @ 30 VDC/30VAC, resistive
Probe Options
Accepts up to 6 Unsupervised Surface Probes (W-S-U)
Accepts up to 6 Unsupervised Under Carpet Probes (W-UC-U)
Lead Length 1-2 probes; max recommended distance of 200FT (61 m)
3-6 probes; max recommended distance of 100FT (30.5 m)
Sensor Cable Probes include 15 (4.6 m) cable. Extend using 22 AWG twisted pair.
WB200 Console Dimensions 4.1 × 2.36 × 1.18 (10 × 6 × 3 cm)
Probe Dimensions: 2 × 3 × 0.88 (5.1 × 7.6 × 2.2 cm)

IN STOCK
QTY:

Have Questions?

Ask our experts: