Shop Bosch | Brands We Sell

Bosch B99 | USB Cable for B Series Programming and Service. USB Cable for B-Series Programming and Service. The B99 is a Male A to Male A USB cable used to directly connect a computer to a control panel for programming with Remote Programming Software (RPS) by Bosch. The cable allows programming while on-site and without the need for an Ethernet connection or an interface module.
Allows programming on-site without an Ethernet cable or interface module

The Bosch D263THS two-wire photoelectric smoke detector uses an infrared (IR) LED light source and a silicon photodiode to measure light in a chamber. A fine screen covers the chamber to deter insects and to reduce dust accumulation and nuisance alarms. During a fire, smoke particles reflect light onto the photodiode. When the photodiode measurements exceed the alarm threshold, the D263TH signals an alarm condition. After the alarm condition clears, interrupt power at the control panel to reset the detector. The D263THS is equipped with a 135F (57C) heat sensor and sounder.

The NDS-5703-F360LE is a discreet and aesthetic panoramic camera for indoor and outdoor surveillance. Its stereographic, panoramic lens provides full 360° coverage without blind spots, ideal for surveillance applications that require wide area coverage in a single, detailed view. The camera offers full situational awareness and simultaneous high-resolution zoomed-in images. The high-end system on chip (SoC) provides dewarping for easy integration and flexible viewing and recording. Built-in Intelligent Video Analytics enriches full situational awareness and triggers relevant alerts. Intelligent Audio Analytics gives meaning to the sounds it captures. The camera’s integrated IR provides the flexibility to control IR intensity in multiple zones to prevent IR saturation. Additionally, with its wide range of inputs and outputs, such as Alarm and HDMI, it can be used for any application. The camera has an IK10 and IP66 design to protect itself against vandalism and all weather conditions.

1K 1/2W EOL RES 8/PKG. The P105F EOL resistor is a 1 kO, 0.5 W resistor with 18 AWG (1.2 mm), violet wire leads (each approximately 15 cm [6 in.] long). It is used as an end-of-line resistor for loop supervision and is supplied in packages of eight.

The FCA-350 series bases are designed specifically for use with Bosch’s conventional detectors including Photoelectric smoke, Photoelectric smoke with heat, and Fixed temperature/rate-of-rise heat detectors. Each base is an electronics free 6” base featuring a plastic tamper-lock lug.

The FCH-350 series fixed temperature/rate-of-rise heat detectors are suited for installation where high heat output fires are expected or in areas where ambient conditions would not allow use of other detection methods. Heat detectors are intended for protection of property.
The FCH-350-135 fixed temperature/rate-of-rise heat detectors are suited to detect in the presence of slow or fast rising temperatures due to burning combustibles. The construction of these models incorporate a thermistor heat element protected from damage by the built-in, durable plastic guard. These electronic heat detectors incorporate two power/alarm LED’s for 360° indication of status. In standby condition the power LED’s flash green. In an alarm condition the LED’s latch on red.

The contact is available in a metal finish. It has a wider gap for reduced false alarms and a four-way adjustable magnet bracket. It includes an armored cable. Use for mounting on door tracks.
All contact models are compatible with control panel models that accept contact inputs.